Anker · Waterproof Personal Electronics Cases
New Nylon USB-C to USB-C 100W Cable (10 ft, 2-Pack)
Low risk. Nylon cable jacket has minimal PFAS concern.
Nylon jackets and copper-alloy connectors do not typically contain intentional PFAS. Material composition poses lower risk than treated apparel.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Nylon jacket with copper-alloy connectors
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Nylon jacket degradation under heat or UV
Nylon jackets can become brittle and crack if exposed to sustained temperatures above 60C or prolonged UV light. This is a durability and electrical safety concern (short-circuit risk) rather than toxicity risk, and is largely preventable through normal storage.
PVC or TPE insulation off-gassing at high power
The internal insulation layer (likely PVC or TPE) may release trace volatile compounds if the cable operates consistently near its 100W rated limit (which generates internal heat). At typical household charging power (20-65W), this risk is minimal. Avoid coiling cables tightly during use or leaving them in hot cars.
Microplastic shedding from nylon jacket wear
Nylon jackets can shed microfibers if abraded repeatedly, though the quantity is negligible for a cable. This poses no inhalation or ingestion risk in typical desktop or pocket use but is worth considering for coastal areas where electronics waste enters waterways.
What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
Copper-alloy connector corrosion or copper leaching into skin/contact surfaces
USB-C connectors are typically nickel-plated copper alloys. Under normal use (dry, room-temperature charging), no corrosion or leaching has been documented. Risk only increases if connector is frequently exposed to moisture or sweat; standard use carries negligible hazard.
Unlabeled or non-certified internal materials
Anker cables are produced to meet USB-C power delivery specs and basic EMC standards, but the brand does not publicly disclose full material composition (e.g., specific polymer grades, additives, or phthalate testing). This is industry-standard opacity, not a documented failure.
The full breakdown
What it's made of and why it matters
This cable uses a nylon fabric jacket over internal copper conductors and likely PVC or TPE insulation. Nylon jackets are chosen for durability and abrasion resistance, not for direct contact with food or skin in sustained ways. The copper-alloy connectors are standard for USB-C and carry no known leaching risk under normal charging use. The 10-foot length and 100W rating mean this cable handles moderate power (up to 5A typical for USB-C PD) without overheating concerns if manufactured to spec.
The brand's record and disclosure
Anker is a major electronics accessory manufacturer with a large installed base and no widely documented recalls or safety scandals in the USB cable category. The brand has not publicly disclosed specific PFAS testing or avoidance strategies for cable jackets, which is typical for the consumer electronics accessory space. Anker products generally comply with basic CE and FCC standards. No independently verified safety certifications specific to cable composition (e.g., third-party toxicology testing) are publicly available.
How it compares in its category
Nylon-jacketed USB cables are extremely common and offer lower concern for wear compared to bare rubber or PVC jackets. This product aligns with mainstream construction for the price point and feature set. Braided nylon cables have similar PFAS profiles as jacketed nylon; the difference is wear resistance and user preference. No established safety advantage or disadvantage versus other Anker or competitor cables in the same price range.
If you buy it
Keep the cable away from sustained high heat (above 60C ambient) and do not route it near heaters or leave in direct sunlight for months, as nylon can degrade and become brittle. Inspect the jacket periodically for cracks, fraying, or exposed copper; replace if damage appears to avoid potential short circuits. Clean connectors with a dry cloth if they appear corroded. The 2-pack format is practical for multiple devices; store one in a drawer and one in active use to minimize handling stress on either cable.
What we don’t know
- Basis
- Model estimate, 78% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Anker has made none
Formulations change between production runs, so check the current label. How we grade.
More waterproof personal electronics cases grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.