Canon · Waterproof Camera & Lens Protection Cases
Canon Marine Waterproof Camera Case
No coating described, and no PFAS statement from the brand.
The product information we reviewed describes waterproof case, likely polyurethane or nylon, with no water-repellent coating named. Water resistance on products like this usually comes from the material and its seals rather than a surface treatment. The brand has published no PFAS statement for it.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Waterproof case, likely polyurethane or nylon
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
You may also be interested in
Top-graded picks in the categories readers replace first, every one scored on the same rubric.
- polypropylene filter housing, carbon/sediment cartridge
- We found no PFAS statement from the brand
- Bacterial growth in spent cartridges
3 hazards checked on this product, all on its full breakdown.
Aquasure
Premier Series 75 GPD Under Sink Reverse Osmosis Water Filtration System
- RO membrane, carbon filters, stainless steel housing
- We found no PFAS statement from the brand
- Bacterial and microbial growth in housing and filters
4 hazards checked on this product, all on its full breakdown.
Avocado
Vegan Mattress
- organic cotton, natural latex, coconut coir, recycled steel coils
- The brand calls it PFAS-free, which we have not verified
- Heavy metals
2 hazards checked on this product, all on its full breakdown.
What Canon Marine Waterproof Camera Case is made of, ingredients and materials
Canon Marine cases are typically constructed from polyurethane or nylon with sealed seams and integrated gaskets, not surface coatings. Polyurethane is a rigid thermoplastic that does not leach chemicals into food or skin under normal storage use. The waterproofing comes from the material density and mechanical seals (gaskets, zippers, clips), not a chemical treatment, so degradation risk is primarily physical wear rather than chemical off-gassing.
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Polyurethane degradation and off-gassing
Long-term polyurethane exposure to UV, heat, or high humidity can break down the polymer and release volatile organics (VOCs). In a sealed camera bag, this is not typically an inhalation risk, but prolonged storage in direct sunlight or warm vehicles may accelerate degradation of gaskets and seals.
Nylon fiber shedding or microplastic release
If the case includes nylon webbing straps or lining, mechanical wear or rubbing against camera equipment can generate microfiber shedding. This poses minimal direct hazard to the camera user but contributes to microplastic burden in storage and washing if the case is cleaned frequently.
Zipper metal or fastener corrosion
Metal zippers and clips can corrode if exposed to salt water or chlorine without rinsing. Corrosion residue is unlikely to reach the camera interior if seals are intact, but corroded fasteners weaken waterproof integrity over time and may eventually expose stored items to moisture.
What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
Gasket and seal material composition
Canon does not publicly disclose the specific elastomer or rubber compound used in gaskets (often EPDM or nitrile rubber). No contamination events or chemical leaching have been reported for waterproof cases in this category, and gaskets contact only the camera exterior, not food or skin.
Adhesive or glue residue in seams
Seam-sealed waterproof cases may use polyurethane adhesives to bond materials. Canon does not disclose adhesive type, and no recalls or off-gassing complaints are on record. Risk is negligible because adhesives are interior-facing and not in contact with electronics or food.
How is this PFAS grade calculated?
The brand's record and disclosure
Canon has not published a PFAS reduction commitment or material safety disclosure specific to camera cases. The brand has no documented recalls or chemical safety controversies tied to waterproof cases. Canon's primary business focus is electronics, not consumer chemistry oversight, so transparency on case materials remains limited but baseline safety concerns are absent from public record.
How it compares in its category
Hard waterproof cases (polyurethane shells) present lower chemical hazard than soft fabric bags with water-repellent coatings, which often use fluorinated compounds for water-repellent coating (durable water repellency). Canon's sealed rigid design avoids reliance on chemical water resistance, making it lower concern than textile-based alternatives that may require water-resistant treatments. Comparable hard cases from brands like Pelican use similar polyurethane construction with equivalent safety profiles.
If you buy it
Store camera equipment in a cool, dry place away from direct sunlight to slow polyurethane degradation; UV exposure can make gaskets brittle over 5-10 years. Do not apply heat to the case or store near heat sources, as polyurethane can warp. Inspect gaskets annually for cracks or hardening; replace when visible wear appears. Rinse with fresh water after salt-water or sandy exposure to prevent corrosion of zippers and clips.
What is not known about PFAS in this product?
- Basis
- Model estimate, 35% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Canon has made none
Formulations change between production runs, so check the current label. How we grade.
More waterproof camera & lens protection cases grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.