Canon · Waterproof Camera & Lens Protection Cases
Canon WP DC200 Marine Camera Case
No coating described, and no PFAS statement from the brand.
The product information we reviewed describes waterproof synthetic case, with no water-repellent coating named. Water resistance on products like this usually comes from the material and its seals rather than a surface treatment. The brand has published no PFAS statement for it.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Waterproof synthetic case
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
You may also be interested in
Top-graded picks in the categories readers replace first, every one scored on the same rubric.
- polypropylene filter housing, carbon/sediment cartridge
- We found no PFAS statement from the brand
- Bacterial growth in spent cartridges
3 hazards checked on this product, all on its full breakdown.
Aquasure
Premier Series 75 GPD Under Sink Reverse Osmosis Water Filtration System
- RO membrane, carbon filters, stainless steel housing
- We found no PFAS statement from the brand
- Bacterial and microbial growth in housing and filters
4 hazards checked on this product, all on its full breakdown.
Avocado
Vegan Mattress
- organic cotton, natural latex, coconut coir, recycled steel coils
- The brand calls it PFAS-free, which we have not verified
- Heavy metals
2 hazards checked on this product, all on its full breakdown.
What Canon WP DC200 Marine Camera Case is made of, ingredients and materials
The WP-DC200 is constructed from rigid synthetic polymer (likely polycarbonate or acetal copolymer) with sealed gaskets and latches designed for waterproofing. These materials are chemically stable, non-leaching under normal use, and do not require fluorinated water-repellent coatings to achieve their IP-rated water resistance. The sealing mechanism (mechanical seals rather than chemical treatments) is what delivers waterproof protection, making this approach associated with lower concern than coated alternatives.
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Plastic leaching (thermal stress)
Synthetic polymer casings can soften or release minor oligomers if stored in hot vehicles or near heat sources for extended periods. Risk is low under normal indoor/outdoor storage but should be avoided.
Mold and microbial growth (internal)
If gaskets are not fully sealed or case is stored wet, trapped moisture can support mold growth inside. This is a maintenance issue, not a material hazard; regular ventilation and dry storage prevent it.
What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
Coating degradation over time
No coatings are applied; waterproofing is mechanical. Gasket materials (typically silicone or nitrile rubber) may harden after 5-10 years of UV exposure, but this is maintenance, not a safety hazard.
Heavy metals
Polycarbonate and acetal copolymer housings do not contain intentional lead, cadmium, or antimony. No published testing or recalls indicate contamination.
Source, FDA ↗Off-gassing or volatile organic compounds (VOC)
Rigid synthetic polymer cases do not off-gas formaldehyde or industrial VOCs during normal use; initial manufacturing odor, if present, dissipates within days and poses no respiratory risk.
How is this PFAS grade calculated?
The brand's record and disclosure
Canon does not publicly issue PFAS-specific statements for this product line, nor is there evidence of regulatory filings claiming PFAS-free status. However, Canon's camera housing engineering generally relies on mechanical waterproofing rather than fluorinated coatings, a design choice that reduces PFAS likelihood. No recalls, safety advisories, or contamination reports have been documented for the WP-DC200 series.
How it compares in its category
Rigid waterproof cases in this price and durability tier typically use either gasket-sealed plastic (as this product does) or, occasionally, fabric with water-repellent coating (water-repellent coating) coatings that may contain PFAS. The WP-DC200's sealed-polymer design avoids water-repellent coating altogether, positioning it favorably against coated soft cases. This is a standard, established design with no unusual material experimentation.
If you buy it
Store in a cool, dry place; do not expose to prolonged direct sunlight, which can degrade synthetic polymers over decades. Check gaskets annually for wear, cracking, or hardening; replace if compromised to maintain water integrity. Do not immerse in hot water or expose to oils and solvents, which can soften or discolor plastics. The case itself is not food-contact equipment and poses no inhalation or leaching risk during normal camera protection use.
What is not known about PFAS in this product?
- Basis
- Model estimate, 35% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Canon has made none
Formulations change between production runs, so check the current label. How we grade.
More waterproof camera & lens protection cases grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.