Noise · Waterproof Fitness Trackers & Cases
Noise Endeavour Pro Gps Smartwatch
No coating described, and no PFAS statement from the brand.
The product information we reviewed describes unspecified polymer/resin case, with no water-repellent coating named. Water resistance on products like this usually comes from the material and its seals rather than a surface treatment. The brand has published no PFAS statement for it.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Unspecified polymer/resin case
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
BPA & bisphenols
Unspecified resin/polymer formulation typical of budget trackers may contain BPA or BPS (endocrine disruptors). No test result or material certification from the brand is public. Risk is low for adult skin contact in normal use but increases if device is heated above 60°C or if polymer is degraded by sweat acids over months.
Source, FDA ↗Microplastic shedding from case wear
Generic polymers degrade over extended UV exposure, thermal cycling, or mechanical stress (impact, repeated band attachment). Microscopic polymer particles from case abrasion or seal failure are unlikely to enter the body via skin contact alone, but fragments shed into sweat or water are a minor environmental concern and an indirect ingestion risk if fingers contact worn surfaces and are placed ne
Off-gassing from uncured or low-grade resin
If the polymer case is made from uncured or low-grade thermoplastic resin, volatile organic compounds (VOCs) may off-gas, especially in warm environments or new shipments. Odor is the primary indicator; if the unworn device smells strongly of chemicals for more than 24-48 hours of airing, off-gassing intensity is above typical baseline. Inhalation risk is minimal on wrist, but sensitivity to fragr
Seal degradation and water ingress over time
Waterproofing relies on elastomer seals (often silicone or rubber gaskets) that degrade with age, temperature cycling, and mechanical stress. No warranty information on seal durability is disclosed. Water ingress would not directly release polymer chemicals but could promote internal corrosion and mold growth, with potential skin contact if the device is worn while damp.
What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
Heavy metals
No manufacturing defects, recalls, or test reports indicating lead, cadmium, or other heavy metal pigments in the case colorant are on record. Budget polymer cases typically use organic dyes or inorganic oxides; the risk is negligible for skin contact. No data suggests concern for this product specifically.
Source, FDA ↗The full breakdown
What it's made of and why it matters
The Noise Endeavour Pro uses an unspecified polymer or resin case, typical of budget fitness trackers. Without material specification (e.g., ABS, polycarbonate, polyurethane), it is unclear whether the resin contains BPA, BPS, or other endocrine disruptors common in generic polymers. The case achieves waterproofing through seals and material density, not a coating layer, so no surface treatment hazards are known. Lack of published material data sheets limits independent assessment of leaching risk under sweat or temperature stress.
The brand's record and disclosure
Noise is an Indian consumer electronics brand focused on budget wearables. The brand has not published material safety certifications, test reports, or PFAS/BPA statements for this model, which is typical for the budget segment but unusual for global retailers. No recalls or safety controversies specific to this product have been established in public records. Silence on chemical composition is a transparency gap, not evidence of harm, but complicates independent risk assessment.
How it compares in its category
The Endeavour Pro sits at the lower end of the fitness tracker market; competitors at similar price points (sub-USD 100) equally lack detailed material disclosure. Mid-range trackers (USD 150+) from Garmin, Fitbit, or Apple often publish material sourcing or third-party test summaries. The Noise product is neither better nor worse than peers in transparency; generic polymer cases with sealed construction are standard, and documented leaching events in this category are rare if the device is not heated above 50-60°C.
If you buy it
Keep the watch below 60°C to avoid accelerated polymer degradation and potential leaching; remove it before hot showers or saunas. Clean gently with lukewarm water and mild soap; avoid prolonged soaking or abrasive scrubbing that may compromise seals. If the case shows cracks, discoloration, or smell of chemical off-gassing after months, discontinue use. Replace the band annually if it shows wear; third-party bands may carry unvetted material risks, so prioritize OEM replacements.
What we don’t know
- Basis
- Model estimate, 35% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Noise has made none
Formulations change between production runs, so check the current label. How we grade.
More waterproof fitness trackers & cases grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.