Does Aquatech waterproof camera & lens protection cases have PFAS?
We graded 8 Aquatech waterproof camera & lens protection cases products, averaging Excellent (85/100). 8 of them grade Good or better. Against the other 30 waterproof camera & lens protection cases brands we grade, where the middle brand sits at 68/100, Aquatech is better than typical, scoring above 82% of them.
PFAS Authority is a scoring system, not a laboratory. We do not test products ourselves. Grades are model-based, built from published ingredients, materials, certifications, brand disclosures and third-party lab results where they exist. See the rubric.
Aquatech waterproof camera & lens protection cases worth buying Good or better, best-graded first
Aquatech
EDGE Pro Water Housing for Canon EOS R6 / R6 MK II / R6 MK
Polycarbonate/acrylic lens housing with waterproof seals
BPA & bisphenols
Polycarbonate can release trace BPA under heat (above 60-70°C) or prolonged UV exposure.…
Gasket/seal material degradation
Rubber and silicone seals can degrade, crack, or harden over 2-5 years of use, especially…
Polycarbonate brittleness and breakage
Extended UV exposure or physical stress can cause cracks in polycarbonate, creating sharp…
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Aquatech
EDGE Base Water Housing for Sony Alpha Series Cameras
Polycarbonate housing, waterproof gaskets/seals
PFAS
Elastomer seals in camera housings commonly use water-repellent coating (water-repellent…
Polycarbonate stress cracking and microplastic shedding
Polycarbonate degrades under UV light, temperature cycling, and impact. Micro-cracks can…
Gasket degradation and seal failure
Elastomer gaskets lose elasticity and develop permanent set over time, especially if…
Mold and bacterial growth in stored housings
If the housing is stored wet or incompletely dried, gasket grooves and interior surfaces…
Medium risk. Waterproof housing likely uses water-repellent coating coatings, PFAS unconfirmed.
⚠Brand says nothing about PFAS
Aquatech
EDGE Pro Water Housing Canon R5
Polycarbonate housing with waterproof sealing gaskets
BPA & bisphenols
Polycarbonate housing can micro-fracture over years of UV exposure and thermal cycling…
Mold or microbial growth in sealed environment
If the housing is stored wet or incompletely dried after use, moisture trapped inside can…
Metal hardware corrosion or leaching
Fasteners and latch hardware may be brass, steel, or aluminum; prolonged salt water…
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Aquatech
Water Housing Cover
Plastic housing
Plastic brittleness and fracture over time
Rigid polymer housings can become brittle with age, UV exposure, or thermal cycling.…
Microplastics
Heavy handling, impact, or prolonged UV exposure may cause surface micro-cracking and…
Mold and bacterial growth in sealed interior
If the housing is stored wet or incompletely dried after water immersion, interior…
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Aquatech
EDGE Base Water Housing for Canon Mirrorless Cameras
Polycarbonate/acrylic housing
Polycarbonate degradation and microplastic shedding
Polycarbonate can develop micro-scratches and stress fractures over many years of use…
Silicone gasket and rubber seal degradation
Seals are not part of the polycarbonate housing itself but are critical to waterproofing.…
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Aquatech
Sport Housing Cover
Camera housing, material not fully described
Gasket and seal degradation
Silicone or rubber gaskets in waterproof seals can degrade, harden, or develop mold if…
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Aquatech
EDGE Pro Underwater Housing for Sony FX3 / FX30
Polycarbonate/acrylic housing with waterproof seals and gaskets
PFAS
Elastomer seals in underwater housings across all brands typically rely on Teflon-type…
Polycarbonate photodegradation and optical haze
Extended UV exposure (sun storage, tropical shooting) can yellow or cloud polycarbonate…
Gasket and elastomer degradation over time
Generic user reports across underwater housing forums document that elastomer seals…
Mold and bacterial growth in seals if not dried
If the housing is not dried thoroughly after use, moisture trapped in gasket grooves can…
These underwater housings likely contain PFAS in their waterproof seals.
⚠Brand says nothing about PFAS
Aquatech
EDGE Pro Water Housing Sony FX3 / FX30 Rental
Polycarbonate housing
Rubber seal (O-ring) degradation
Elastomer seals degrade from ozone, UV, and repeated compression cycles. Rental units see…
Impact and stress-cracking of polycarbonate housing
Polycarbonate can develop stress cracks if subjected to sharp impacts or dropped from…
Optical material contamination (internal surfaces)
Dust, salt residue, or lens contact inside a poorly sealed or maintained housing can…
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
See every Aquatech product we grade on the Aquatech brand page, or the full waterproof camera & lens protection cases ranking.