Skullcandy Review, Is Skullcandy Non-Toxic?
Across 8 graded products, Skullcandy averages Excellent (79/100). On disclosure, the brand says nothing publicly about PFAS. 7 of its products grade Good or better. Grades are model-based estimates, not lab results.
PFAS Authority is a scoring system, not a laboratory. We do not test products ourselves. Grades are model-based, built from published ingredients, materials, certifications, brand disclosures and third-party lab results where they exist. See the rubric.
Does Skullcandy have PFAS, by category
Worth buying from Skullcandy Good or better, best-graded first
Skullcandy
Geekria Shield Earbuds Case for Skullcandy EcoBuds, Dime 2 / 3 Smokin'
EVA foam case shell
Microplastics
Prolonged mechanical stress (compression, bending) can cause EVA foam to shed small…
Bacterial or mold growth in case cavity
Closed foam cases trap moisture if stored damp. Bacteria and mold can colonize the…
Lower concern; EVA foam unlikely to contain PFAS.
⚠Brand says nothing about PFAS
Skullcandy
Smokin' Buds Wireless Earbuds Clear Gray Charging Case
Plastic housing, silicone ear tips, electronics
Silicone ear tip degradation and fragmentation
Extended use may cause silicone to harden, tear, or shed small fragments. Fragments are…
Bacterial growth in ear canal contact surfaces
Silicone ear tips create a warm, moist microenvironment where skin bacteria can…
Lower PFAS concern for standard earbud materials with no coating on record.
⚠Brand says nothing about PFAS
Skullcandy
Geekria Shield Earbuds Case for Skullcandy EcoBuds, Jib True 2, Dime Evo/3/2
Polyester, neoprene, or molded EVA foam case
Volatile organic compound (VOC) off-gassing from foam or adhesives
Molded EVA foam and neoprene can release trace VOCs, particularly in new products or when…
Neoprene degradation and chemical release over time
Neoprene liners can develop microscopic tears and shed rubber particles or residual…
Bacterial or mold growth in case cavity
Any sealed earbud case can trap moisture and harbor bacteria if not dried before storage…
Lower concern; typical protective case without waterproofing treatment.
⚠Brand says nothing about PFAS
Skullcandy
Push Play Active True Wireless Earbuds
Plastic housing
Seal degradation and water ingress
IP54 rating protects against casual water exposure but seals degrade over time. Repeated…
Allergenics in ear tip materials
Silicone ear tips may contain trace vulcanization residues or additives. No latex…
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Skullcandy
Geekria Carrying Case for Skullcandy Indy True Wireless In-Ear Earbud
Polyester or neoprene carrying case, likely uncoated or minimally treated
Flame retardants
If the case contains polyester padding or flame-resistant treatment, brominated or…
Microplastic shedding
Neoprene and polyester shed microfibers, especially with friction and washing. Since the…
Lower concern; hard case material unlikely to contain PFAS.
⚠Brand says nothing about PFAS
Skullcandy
Shield Earbuds Case For Skullcandy Ecobuds, Dime 2/3, Smokin' Buds
Plastic case, likely TPU or silicone blend
Microplastics
Prolonged flexing, UV exposure, or heat can cause surface cracking in TPU or silicone…
Bacterial or mold growth in sealed case
If earbuds are stored damp or the case is exposed to high humidity without ventilation…
Low direct risk signal; Skullcandy offers no PFAS transparency.
⚠Brand says nothing about PFAS
Skullcandy
Headphone Protective Case for Skull Candy Mod
Protective case, likely polyurethane or neoprene
VOC off-gassing (polyurethane/neoprene)
New elastomer cases may emit volatile organic compounds for days after manufacture. This…
Elastomer degradation and leachables over time
Prolonged heat, UV, and mechanical stress can degrade polyurethane or neoprene, releasing…
Lower concern; protective cases rarely use PFAS treatments.
⚠Brand says nothing about PFAS
Graded and flagged Poor and Bad, we’d swap these
Skullcandy
Roll Top Bag
Nylon fabric with water-resistant treatment
PFAS
Nylon water-resistant treatments commonly use fluorocarbon chemistry; Skullcandy has not…
Coating degradation and particle release
Nylon bags with surface treatments can flake or degrade over time with use and washing…
Roll-top design suggests water-resistant coating; PFAS risk unconfirmed.
⚠Waterproof or stain-proof treatment
Skullcandy and PFAS, common questions
- Does Skullcandy have PFAS?
- We graded 8 Skullcandy products, averaging Excellent (79/100). 7 grade Good or better. Grades are model-based estimates built from published materials, ingredients and disclosures, not lab tests.
- Is Skullcandy non-toxic?
- Geekria Shield Earbuds Case for Skullcandy EcoBuds, Dime 2 / 3 Smokin' is the highest-graded Skullcandy product we have scored, at 85/100. It depends on the product line rather than the brand, so check the grade of the exact item you are buying.
- Which Skullcandy products are lower concern for PFAS?
- The highest-graded Skullcandy products we have scored are Geekria Shield Earbuds Case for Skullcandy EcoBuds, Dime 2 / 3 Smokin', Skullcandy Smokin' Buds Wireless Earbuds Clear Gray Charging Case, Geekria Shield Earbuds Case for Skullcandy EcoBuds, Jib True 2, Dime Evo/3/2. That is our model-based estimate from materials and public disclosure, not a lab test.
- Which Skullcandy products should I avoid?
- The lowest-graded Skullcandy products we have scored are Skullcandy Roll Top Bag. Each one links to the evidence behind its grade.
Every grade uses the same public rubric. How grades work →