PFAS75/ 100Excellent
Overall57/ 100Good
Murphy Oil Soap Multi-use Spray Ready-To-Use - 22 fl oz (0.7 quart) - Fresh Orange Scent - Orange Bottle - 9 / Carton

Murphy Oil Soap · Leather Conditioner

Murphy Oil Soap Multi-use Spray Ready-To-Use - 22 fl oz (0.7 quart) - Fresh Orange Scent - Orange Bottle - 9 / Carton

Excellent

Low risk; soap formula has minimal PFAS risk.

Verdict · BuyEstablished multipurpose cleaner with transparent formulation; no major hazards documented for intended use as floor/surface cleaner.

Murphy Oil Soap is plant-oil-based cleaner with no known PFAS-related ingredients. The brand makes no PFAS claims, and the plastic bottle isn't treated for water or grease resistance.

Check price on Amazon →

We flunk more products than we pass. This one earned its grade. How we grade

Material

Soap solution in plastic spray bottle

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

What’s concerning

♾️

Category baseline

The starting point for this type of product, before anything specific to this product is counted.

80/ 100
♾️

No PFAS disclosure

No public statement from the brand about PFAS in this product.

85/ 100
⚠️

Fragrance allergens

Fresh orange scent is achieved through synthetic fragrance compounds and/or limonene (a natural citrus extract). Individuals with fragrance sensitivity or citrus allergy may experience respiratory irritation or contact dermatitis; no specific reaction data published for this formulation.

70/ 100
⚠️

Skin irritation from surfactants

Soap-based surfactants can cause mild dryness or irritation with prolonged direct contact. Risk is low under intended use (diluted, wiped surfaces) but higher if undiluted product contacts skin or if used to hand-wash dishes without gloves.

70/ 100
⚠️

Eye irritation if sprayed directly

Concentrated soap solution will irritate eyes; this is typical for all spray cleaners. Avoid spraying toward face and wash eyes immediately with water if contact occurs.

45/ 100

What’s reassuring

Base material not linked to PFAS

The main material recorded for this product is not one associated with PFAS.

100/ 100

Plastic bottle leachables

HDPE spray bottles used for Murphy Oil Soap are generally stable and low-risk. No documented leaching of BPA, phthalates, or other plasticizers into the aqueous soap solution under normal storage conditions.

95/ 100
💨

Formaldehyde / VOCs

Murphy Oil Soap does not typically contain formaldehyde or preservative systems that release formaldehyde. The mineral oil and soap base require minimal antimicrobial preservation compared to water-heavy lotions or creams.

Source, ATSDR
95/ 100

The full breakdown

What it's made of and why it matters

Murphy Oil Soap is a water-based soap solution containing saponified mineral oil, surfactants, and fragrance, packaged in a plastic spray bottle (typically HDPE or similar). The formula is designed for hard-surface cleaning (wood floors, tile, linoleum) and contains no known toxic active ingredients. The mineral oil content is food-grade quality; the spray delivery means you are not ingesting or inhaling significant quantities during normal household use.

The brand's record and disclosure

Murphy Oil Soap has been in continuous production since 1912 and maintains a basic safety data sheet listing. The brand does not advertise third-party certifications (EcoLogo, Green Seal, etc.) and has not publicly committed to PFAS elimination, though the soap formulation itself carries minimal inherent PFAS risk. No major recalls or regulatory actions specific to consumer safety hazards have been documented for this product line.

How it compares in its category

Murphy Oil Soap is a traditional, minimally-formulated multipurpose cleaner compared to modern enzyme-based or concentrated spray cleaners. It is less likely to contain problematic flame retardants, antimicrobials, or undisclosed chemical preservatives than heavily marketed alternatives. The trade-off is lower cleaning power per volume and a dated marketing positioning rather than any safety advantage.

If you buy it

Use as directed on the label, dilute for most surfaces, spray lightly, and wipe dry. Store away from heat and sunlight to preserve the soap emulsion. Do not ingest or allow prolonged skin contact; rinse hands after use. The plastic bottle is not designed for reheating or prolonged storage of other substances; discard when empty rather than repurposing.

What we don’t know

Basis
Model estimate, 78% confidence, not a lab result
Lab test
None on record for this exact product
Brand statement
Murphy Oil Soap has made none

Formulations change between production runs, so check the current label. How we grade.

More leather conditioner grades

How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.