· Waterproof Camera & Lens Protection Cases
Eylar Standard 16" Gear Equipment Hard Camera Case Waterproof with Foam
No coating described, and no PFAS statement from the brand.
The product information we reviewed describes plastic hard case and foam interior, with no water-repellent coating named. Water resistance on products like this usually comes from the material and its seals rather than a surface treatment. The brand has published no PFAS statement for it.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Plastic hard case and foam interior
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
What’s concerning
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
Foam off-gassing or microparticle shedding
Polyethylene and polyurethane foam can slowly degrade and shed microparticles over 5-10 years, especially in warm or humid environments. This is an aging/material durability issue rather than a chemical toxicity hazard; particles remain inside the sealed case and do not pose skin or inhalation risk during normal use.
Mold or bacterial growth from moisture retention
If the case is sealed while damp or stored in high-humidity conditions, internal foam and plastic surfaces can support mold or mildew growth. This is a maintenance issue, always air-dry the interior before sealing, and store in a dry location. This does not indicate a chemical hazard in the material itself.
Volatile organic compound (VOC) off-gassing from plastic or foam
New polypropylene and polyurethane foam may emit low levels of VOCs (e.g., hexane, toluene) immediately after manufacturing. Off-gassing typically drops significantly within the first week of airing. No long-term or hazardous VOC release is expected during normal storage and use.
What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
BPA & bisphenols
Polypropylene and ABS are not known to contain or leach BPA, BPS, or phthalates under normal storage of camera equipment at room temperature. No heating or food contact occurs, and no documented leaching events for this product category exist.
Source, FDA ↗Lead
No enamels, ceramic glazes, or chemical coatings are described for this product. Waterproofing is achieved through mechanical sealing (gaskets and latch design), not surface treatments. No coating-related hazards are identified.
Source, ATSDR ↗The full breakdown
What it's made of and why it matters
The Eylar Standard 16 is constructed from rigid polypropylene or ABS plastic housing with polyethylene or polyurethane foam interior. Neither material class is known to leach significant quantities of hazardous chemicals under normal storage conditions (room temperature, dry environment). The case contains no described enamels, glazes, or surface coatings that would introduce lead, cadmium, or Teflon-type coating risks. Foam degradation over decades of use may shed microparticles, but this poses no direct hazard to camera equipment or user skin contact during normal handling.
The brand's record and disclosure
TravelMate has no established public record of safety certifications, independent testing disclosures, or chemical compliance statements for this product line. The brand has not published material safety data or PFAS stance documentation. No recalls or safety controversies tied to this case model are on record. Without proactive disclosure, consumers lack third-party verification of material sourcing or manufacturing standards.
How it compares in its category
Waterproof camera cases typically rely on rigid plastic shells and foam packing to achieve IP ratings through mechanical sealing (gaskets, latches) rather than chemical coatings. The Eylar Standard 16 follows this conventional design. Premium competitors (Pelican, Storm Case) publish material specifications and some carry certifications; budget and mid-range cases like this one rarely do. Overall chemical risk in this category remains low because water resistance depends on design geometry, not surface treatments.
If you buy it
Store in cool, dry indoor conditions to minimize foam off-gassing and plastic brittleness over time. Do not expose to prolonged direct sunlight, heat above 50C (122F), or solvents, as these accelerate foam breakdown and can cause plastic warping or discoloration. Inspect gaskets and seals annually for cracking or compression loss, replacing if needed to maintain waterproof integrity. Wipe exterior with a damp cloth; avoid abrasive cleaners that may scratch the plastic or degrade any minor surface treatments.
What we don’t know
- Basis
- Model estimate, 35% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- has made none
Formulations change between production runs, so check the current label. How we grade.
More waterproof camera & lens protection cases grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.