· Waterproof Camera & Lens Protection Cases
Waterproof Thermal Camera Case for FLIR C8, C5, C3 & C2
No coating described, and no PFAS statement from the brand.
The product information we reviewed describes unspecified synthetic case material, with no water-repellent coating named. Water resistance on products like this usually comes from the material and its seals rather than a surface treatment. The brand has published no PFAS statement for it.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Unspecified synthetic case material
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Polymer additive profile (unspecified)
Synthetic material type not disclosed; typical rigid-case polymers (EVA, PP, ABS, polyester) may contain antimony trioxide (flame retardant), phthalates, or heavy-metal stabilizers at levels below migration risk for external contact but not independently verified.
Interior lining material composition
Foam or fabric lining is not chemically specified. If neoprene, polyester, or other synthetics, may off-gas VOCs or contain formaldehyde resins, especially if new; off-gassing risk is low for rigid cases due to limited heat and air circulation but present.
Seal degradation and water ingress
User reports on similar TravelMate cases note seal wear after 12-18 months of regular use. Compromised seals allow water and moisture ingress, which poses risk to the camera, not the case itself; case material remains inert.
Microplastic shedding from wear
Abrasion of foam or plastic interior over years of use may generate fine particles. Direct contact with skin or food is not relevant (case holds electronics only), but loose particles could be inhaled if case is opened in confined spaces or handled carelessly.
What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
Thermal off-gassing from heat exposure
No public reports of fume release or degradation under normal storage or camera-use temperatures (under 60C). Rigid polymers in this category are stable; risk is low unless case is left in hot vehicles or direct sun for extended periods.
The full breakdown
What it's made of and why it matters
TravelMate has not publicly specified the synthetic polymer (EVA foam, polypropylene, neoprene, or molded plastic composite are typical for this category). Without disclosure, we cannot confirm absence of problematic additives like antimony (common in polyester) or flame retardants in the shell. The waterproofing appears to come from material density and molded seals rather than applied coatings, which eliminates Teflon-type coating off-gassing and most surface-treatment risks. Interior lining material is also unspecified.
The brand's record and disclosure
TravelMate maintains public silence on material composition, certifications, and chemical safety standards. No known product recalls, chemical controversies, or third-party testing results are on record for this brand. Lack of transparency on polymer type and additives is typical for budget protection-case makers but limits independent verification. No PFAS-specific commitment or statement has been published.
How it compares in its category
Rigid camera cases in this price range rarely disclose polymer identity or additive profiles. Premium competitors (Pelican, OtterBox) sometimes certify materials and test for migration; TravelMate does not. The waterproofing strategy of sealed construction without topical coatings represents lower concern than cases relying on spray-on or fabric-based water repellents, which may contain PFAS or other treatments. For device protection alone, this case matches category norms for chemical risk.
If you buy it
Store away from direct heat and UV to slow any polymer aging that could release additives. Do not wash interiors with solvents; mild soap and water are sufficient. Inspect seals annually and replace the case if they crack, because waterproofing depends entirely on physical integrity, not resistant materials. Ensure the thermal camera itself is completely dry before sealing, as trapped moisture can damage electronics faster than any case chemical.
What we don’t know
- Basis
- Model estimate, 35% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- has made none
Formulations change between production runs, so check the current label. How we grade.
More waterproof camera & lens protection cases grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.