Large 2-Layer KOR Kit
Low concern. No known PFAS-prone materials identified.
Metal and polymer interior fittings make up this storage case. No public PFAS disclosure exists, but materials appear standard industrial-grade without obvious high-risk coatings.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Aluminum or steel case with plastic/polymer interior fittings
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
You may also be interested in
Top-graded picks in the categories readers replace first, every one scored on the same rubric.
- polypropylene filter housing, carbon/sediment cartridge
- We found no PFAS statement from the brand
- Bacterial growth in spent cartridges
3 hazards checked on this product, all on its full breakdown.
Aquasure
Premier Series 75 GPD Under Sink Reverse Osmosis Water Filtration System
- RO membrane, carbon filters, stainless steel housing
- We found no PFAS statement from the brand
- Bacterial and microbial growth in housing and filters
4 hazards checked on this product, all on its full breakdown.
Avocado
Vegan Mattress
- organic cotton, natural latex, coconut coir, recycled steel coils
- The brand calls it PFAS-free, which we have not verified
- Heavy metals
2 hazards checked on this product, all on its full breakdown.
What Large 2-Layer KOR Kit is made of, ingredients and materials
The KOR Kit combines an aluminum or steel exterior shell with polymer-based interior fittings and foam inserts. Aluminum cases do not leach harmful metals under normal storage conditions; any polymers used for latches, seals, or padding are secondary components not in direct food contact. The closed, rigid design minimizes off-gassing compared to soft-sided storage, and metal/rigid plastic materials do not degrade into microplastics during typical use.
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Polymer off-gassing from interior fittings
Interior foam inserts, latches, or gaskets may be made from polyurethane, polystyrene, or other polymers. Off-gassing of volatile organic compounds (VOCs) is minimal in well-ventilated storage but may increase if case is sealed and stored in warm conditions for extended periods.
Foam degradation and particulate shedding
Foam padding can degrade, compress, or shed particles over 5-10 years of use, especially if exposed to heat or UV light. This is primarily a contamination concern for sensitive stored items rather than a direct health hazard to users.
Microbial growth in seals and interior
If the case is stored in humid conditions or used to transport moist items without drying, gaskets and interior surfaces may develop mold or bacterial colonies. Regular inspection and drying prevent this; not a manufacturing defect but a user-maintenance issue.
What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
Aluminum leaching
Aluminum cases do not leach aluminum into stored contents under normal conditions. Risk only exists if storing acidic or alkaline solutions directly in contact with uncoated aluminum; dry goods and sealed items face no hazard.
Metal coating integrity
Cases are powder-coated or anodized aluminum; no lead or cadmium in coatings is indicated in available information. Coating should not flake or corrode under normal storage conditions.
How is this PFAS grade calculated?
The brand's record and disclosure
The brand is a German manufacturer specializing in transport and storage cases; the company does not publicly disclose detailed material certifications or chemical composition breakdowns on consumer-facing channels. No product safety recalls, chemical hazard allegations, or regulatory actions against KOR products are on record. The brand maintains silent positioning on PFAS and other non-legacy chemicals, which is typical for industrial equipment manufacturers rather than consumer goods companies.
How it compares in its category
Hard-shell storage cases like the KOR Kit are inherently lower-risk than soft fabric cases or thermoformed plastic boxes, which can off-gas volatile organic compounds or degrade polymers over time. Metal and rigid polymer cases are chemically inert during storage of non-corrosive items and do not require frequent replacement. Cases are premium-priced but built for longevity, reducing replacement waste and cumulative chemical exposure versus disposable alternatives.
If you buy it
Store the case in moderate temperature (avoid prolonged exposure above 50°C/122°F), as sustained heat may degrade polymer seals or foam inserts. Inspect foam padding and gaskets annually for degradation or compression; replace if crumbling or no longer sealing effectively. Keep interior dry to prevent mold or corrosion of metal components. Do not use for storing strong solvents or corrosive chemicals, as they may degrade internal polymers or cause metal oxidation.
What is not known about PFAS in this product?
- Basis
- Model estimate, 72% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- has made none
Formulations change between production runs, so check the current label. How we grade.
More jewelry cases & organizers grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.