Lloyds Review, Is Lloyds Non-Toxic?
PFAS Authority is a scoring system, not a laboratory. We do not test products ourselves. Grades are model-based, built from published ingredients, materials, certifications, brand disclosures and third-party lab results where they exist. See the rubric.
Across 8 graded products, Lloyds averages Poor (28/100). On disclosure, the brand says nothing publicly about PFAS. None of its products grade Good or better yet. Grades are model-based estimates, not lab results.
Does Lloyds have PFAS, by category
Graded and flagged Poor and Bad, we’d swap these
Lloyds
LloydPans Full Size Aluminum Sheet Pan
aluminum sheet (uncoated)
Aluminum leaching under acidic conditions
Uncoated aluminum can leach small amounts of aluminum into acidic foods (pH below 5.5)…
Surface oxidation and pitting corrosion
Aluminum naturally oxidizes when exposed to air and water. Dishwasher cycles, alkaline…
Heat warping at extreme temperatures
Aluminum has a lower melting point than steel and can warp if exposed to direct flame…
Lower concern, bare aluminum sheet pan has no nonstick coating.
⚠Risky category by default
Lloyds
LloydPans Full Size Aluminum Bun / Sheet Pan XABP-18X26X1
Aluminum sheet pan, uncoated
Aluminum leaching into acidic foods
Uncoated aluminum can transfer small amounts of the metal to acidic foods such as…
Surface oxidation and corrosion
Without protective coating, bare aluminum oxidizes over time, especially if not dried…
Lower concern with uncoated aluminum, no nonstick layer.
⚠Risky category by default
Lloyds
LloydPans Kitchenware Quarter Sheet Pan RCT-15141-DK
Steel with unspecified nonstick coating
Nonstick coating degradation and fume risk (Teflon-type coating)
If the coating is Teflon-type coating-based, overheating above 500F can release fumes…
Coating adhesion and microflaking
Any nonstick coating can chip with use, especially if not hand-washed or if metal…
Avoid until coating is disclosed, nonstick cookware without PFAS transparency raises concern.
⚠Nonstick, coating undisclosed
Lloyds
LloydPans Half Sheet Oven Roaster Set-14543
Steel sheet pan with unspecified nonstick coating
Teflon-type coating fume risk (if present in coating)
If the nonstick coating is Teflon-type coating-based, heating above 500°F can release…
Coating degradation and microflaking
Budget nonstick coatings are prone to accelerated wear from dishwashing, metal utensils…
Steel substrate corrosion if coating fails
If the nonstick layer degrades, the underlying steel can corrode or develop rust spots.…
Skip unless brand discloses coating chemistry, transparency is lacking.
⚠Nonstick, coating undisclosed
Lloyds
LloydPans Half Sheet Pan
Aluminized steel (uncoated or proprietary hard-anodized)
Aluminum leaching in acidic conditions
Aluminized steel can release small amounts of aluminum when in prolonged contact with…
Lower concern, uncoated aluminized steel avoids most PFAS risk.
⚠Nonstick, coating undisclosed
Lloyds
Lloyd Pans 12.93 x 8.93 inch Quarter Sheet Pan - DK, Gray
Steel with nonstick coating (type unspecified)
Teflon-type coating fume risk (thermal decomposition)
If the coating is Teflon-type coating-based, sustained exposure above 500°F can release…
Coating degradation and flaking
Any nonstick layer can wear over time, especially with frequent washing or metal contact.…
Avoid until Lloyd Pans reveals its nonstick coating chemistry.
⚠Nonstick, coating undisclosed
Lloyds
LloydPans Sheet Cake Pan
Carbon steel with nonstick coating (composition unspecified)
Nonstick coating degradation and particle release
With unspecified coating chemistry, the risk of flaking, chipping, or thermal breakdown…
Coating-substrate adhesion failure
Without disclosed adhesion testing or durability standards, long-term separation of the…
Avoid until coating composition is transparent, silence on PFAS is a red flag.
⚠Nonstick, coating undisclosed
Lloyds
LloydPans Kitchenware Multi Pan
Nonstick coating, composition unspecified
Teflon-type coating thermal decomposition (fume inhalation risk)
If the coating is Teflon-type coating-based, heating above 500F can release polymer fume…
Coating degradation and particulate ingestion
Unspecified nonstick coatings degrade with use, thermal shock, and abrasive cleaning.…
Aluminum leaching (if aluminum substrate)
If the substrate is aluminum, acidic foods (tomatoes, citrus, wine) can compromise the…
Bacterial growth in nonstick crevices (if poorly maintained)
Nonstick surfaces trap moisture and food residue in microscopic pits, creating potential…
Avoid until brand clarifies coating chemistry, generic nonstick without PFAS transparency raises concern.
⚠Nonstick, coating undisclosed
Every grade uses the same public rubric. How grades work →