Does Spigen waterproof personal electronics cases have PFAS?
We graded 17 Spigen waterproof personal electronics cases products, averaging Excellent (82/100). 16 of them grade Good or better. Against the other 29 waterproof personal electronics cases brands we grade, where the middle brand sits at 85/100, Spigen is worse than typical.
PFAS Authority is a scoring system, not a laboratory. We do not test products ourselves. Grades are model-based, built from published ingredients, materials, certifications, brand disclosures and third-party lab results where they exist. See the rubric.
Spigen waterproof personal electronics cases worth buying Good or better, best-graded first
Spigen
A610 Universal Waterproof Float Case
TPE (thermoplastic elastomer) with waterproof sealing
TPE material degradation
TPE elastomers can lose elasticity, crack, or become sticky after prolonged UV exposure…
Microplastic shedding
Worn TPE can fragment into microparticles, particularly at stress points (seams…
PFAS
Spigen does not disclose whether the TPE or seals contain fluorinated compounds. TPE…
Medium risk waterproof case with unknown PFAS coating status.
⚠Brand says nothing about PFAS
Spigen
A611p Waterproof Float Case
TPU plastic
Microplastic shedding from material degradation
TPU can fragment if punctured, cracked, or severely weathered, potentially releasing…
Seal or gasket material unknown composition
The case likely contains rubber or elastomer seals at contact points; exact material…
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Spigen
A601 Universal Waterproof Case
TPU/silicone waterproof case
TPU material degradation and leaching
TPU can degrade if exposed to UV, heat, or oils over months to years, potentially…
Seal integrity and microorganism growth
If the case is sealed with moisture trapped inside, prolonged storage could permit mold…
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Spigen
Universal Waterproof Phone Case Waterproof
TPU or silicone
Seal material and gasket contamination
Silicone or rubber gaskets used in seals may occasionally contain minor residual silicone…
Bacterial or mold growth inside sealed case
If the case is sealed with moisture trapped inside, mold or bacterial growth can occur…
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Spigen
Cryo Armor Case for iPhone 15 Pro Max
TPU (thermoplastic polyurethane) bumper with polycarbonate back panel
BPA & bisphenols
Polycarbonate can theoretically release trace BPA when heated above 70°C or exposed to…
Volatile organic compound (VOC) off-gassing
New phone cases may emit faint odors from residual solvents or processing chemicals. This…
Microplastic shedding
Worn TPU or polycarbonate may shed microscopic fragments, especially if scratched or bent…
Lower PFAS concern with standard phone case materials.
⚠Brand says nothing about PFAS
Spigen
Galaxy S26 Series Mag Fit Case
Thermoplastic polyurethane (TPU) and polycarbonate
TPU degradation and discoloration
TPU naturally yellows and can become sticky over 18-24 months in sunlight or high…
Polycarbonate microcracking under impact
Polycarbonate layer may develop stress fractures over time if repeatedly dropped; small…
Magnet safety for medical devices
The Mag Fit magnets may interfere with pacemakers, cardiac monitors, or insulin pumps if…
Mold and bacterial growth in case cavity
If moisture and dust accumulate in the case interior without cleaning, mold and bacteria…
Lower concern case with no identified PFAS risk.
⚠Brand says nothing about PFAS
Spigen
Slim Armor MagFit Case for iPhone 17 Pro Max
TPU (thermoplastic polyurethane), polycarbonate, aluminum
TPU degradation and microplastic shedding
Over years of flex, scratching, and UV exposure, TPU can fragment into microparticles.…
Phone case with lower risk.
⚠Brand says nothing about PFAS
Spigen
Thintect MagFit Case for Apple iPhone 17 Pro Max
Thermoplastic polyurethane (TPU), hard polycarbonate shell
BPA & bisphenols
Polycarbonate inherently contains BPA as a monomer; however, migration to skin contact is…
Volatile organic compound (VOC) off-gassing
New TPU cases may release trace volatile compounds for the first few days of use…
Microplastic shedding from polymer degradation
TPU cases can degrade and shed small polymer particles after 2-3 years, especially at…
Lower risk. Standard phone case materials, no PFAS warning signs.
⚠Brand says nothing about PFAS
Spigen
Optik Armor Case for Galaxy S26 Ultra
TPU and polycarbonate with no specified coatings
TPU degradation and leaching under heat
While TPU is generally stable at room temperature, prolonged exposure to high heat…
Polycarbonate scratch/wear releasing microparticles
As the polycarbonate outer layer ages and scratches, microscopic particles may shed. This…
Lower risk phone case. No typical PFAS coatings in rigid protection.
⚠Brand says nothing about PFAS
Spigen
EV603BT Car Charger
Plastic housing, metal contacts, standard automotive charger components
Plastic housing leaching (thermal stress)
ABS or polycarbonate housing may release trace compounds under prolonged high heat…
Metal contact corrosion and degradation
Over time, especially in humid climates, metal contacts oxidize or corrode, leading to…
Electrical safety and short-circuit risk
Plastic housing integrity is critical for insulation; physical damage, exposure to…
Lower concern. Standard car charger with no high-risk PFAS indicators.
⚠Brand says nothing about PFAS
Spigen
Pkpower Usb-c Charging Cable Cord Wire for Power Banks for iWalk, Spigen PocketBoost, Iniu, RAVPower, Bonai, Anker Usb-c
PVC or TPE cable sheath, copper/aluminum connectors
PVC degradation and particle shedding
PVC outer sheath can crack or become brittle over 2-3 years of use or if exposed to…
Bacterial or mold growth under moisture
If stored in damp conditions or submerged accidentally, TPE/PVC can trap moisture in…
Lower concern. USB-C cable with no water-repellent finish on record.
⚠Brand says nothing about PFAS
Spigen
DuraSync USB-C to USB-C 2.0 Cable C11C1 60W Braided Cord
Braided nylon cord with copper conductors
Nylon jacket degradation with age and UV
Braided nylon is subject to gradual brittleness and discoloration under sunlight or high…
Lower concern. Standard USB cable with no known PFAS triggers.
⚠Brand says nothing about PFAS
Spigen
Durasync Usb-c To Usb-c 2.0 Cable 000ca25703_2 Pack
PVC jacket, copper core, standard connectors
Connector corrosion and contact integrity
Repeated insertion and removal of USB-C connectors can wear gold plating or cause…
USB cable without known PFAS concerns; no targeted treatment.
⚠Brand says nothing about PFAS
Spigen
Bluetooth 4.0 Portable Wireless Speaker Replacement Usb Charging Cable
PVC/rubber charging cable, plastic connector housing
Phthalates
PVC jacketing can release phthalates under heat or prolonged contact with skin; risk is…
Strain relief degradation
PVC and rubber strain relief can crack or separate over 1-2 years with heavy flexing…
Lower concern cable. No PFAS-prone features identified.
⚠Brand says nothing about PFAS
Spigen
Durasync C To C Cable Power Delivery Pd Fast Charging 60w Usb
Rubber-coated copper wire, plastic connector housing
Rubber/TPE jacket degradation and cracking
Heavy use or repeated flexing can cause the outer rubber layer to crack or fray after 1-2…
Electrical safety (short/fire risk from damage)
If the jacket is punctured or heavily damaged, internal conductors may contact each…
Lower concern. Standard USB cable with no known PFAS risk factors.
⚠Brand says nothing about PFAS
Spigen
DuraSync 60W USB-C Cable
Braided nylon outer jacket, copper wire core, thermoplastic elastomer connectors
Connector wear and intermittent contact
TPE connectors can accumulate micro-wear from repeated insertion cycles. This is typical…
Conductor degradation from flexing
Copper wire inside braided cables can fatigue and break if the cable is bent sharply or…
Standard cable with no identified PFAS risk signals.
⚠Brand says nothing about PFAS
Graded and flagged Poor and Bad, we’d swap these
Spigen
A603 Waterproof Bag
Synthetic fabric with unspecified waterproof coating
PFAS
Unspecified waterproof coating on synthetic fabrics commonly uses PFAS-based…
Coating degradation and microparticle shedding
Over time, polyurethane or silicone coatings on waterproof bags can crack, peel, or shed…
Odor/VOC off-gassing from coating
New waterproof bags often emit chemical odors from solvent residues in applied coatings.…
Wait for coating details, waterproof bags often contain PFAS water-repellent coating.
⚠Waterproof or stain-proof treatment
Better waterproof personal electronics cases from other brands
Graded higher than the Spigen average of 82.
Disney Waterproof Phone Pouch
Plastic pouch
BPA & bisphenols
Limited concern
Microplastics
Limited concern
Seal degradation and bacterial/mold growth if wet
Limited concern
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Universal Waterproof Phone Pouch
Plastic pouch
Microplastics
Limited concern
BPA & bisphenols
Limited concern
Phthalate plasticizers in PVC or flexible polymers
Limited concern
Lead
Moderate concern
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
Outdoor Products
SmartPhone Watertight Phone Case
Plastic case
Plastic degradation and microplastic shedding
Limited concern
No coating described, and no PFAS statement from the brand.
⚠Brand says nothing about PFAS
See every Spigen product we grade on the Spigen brand page, or the full waterproof personal electronics cases ranking.