PFAS65/ 100Good
Overall43/ 100Poor
Easton Universal Padding Fit Kit

Easton · Sports Equipment Padding

Easton Universal Padding Fit Kit

Good

Low risk product, though brand discloses nothing on PFAS.

Verdict · SkipFoam padding fit kit poses low chemical risk; no known brand violations. Monitor for degradation; replace if foam breaks down.

This foam and elastic kit lacks waterproofing or nonstick coatings typical of PFAS use. Easton offers no PFAS statement, though comfort padding is inherently lower risk than treated textiles.

Still want this one anyway? Check the price on Amazon. We’d swap it.

Material

foam padding, elastic straps

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

What’s concerning

♾️

Category baseline

The starting point for this type of product, before anything specific to this product is counted.

70/ 100
♾️

No PFAS disclosure

No public statement from the brand about PFAS in this product.

85/ 100
💨

Polyurethane foam off-gassing (VOCs)

New foam padding may release low levels of volatile organic compounds for the first weeks of use. This is typical for expanded foam but poses minimal risk in a non-sealed fit kit exposed to air; odor is often the only observable symptom.

70/ 100
⛏️

Adhesive leachables

The adhesive bonding foam to elastic straps is not disclosed. If water-based or solvent-based urethane, leaching during perspiration contact is theoretically possible but unlikely given minimal contact area and short wear windows.

70/ 100
⚠️

Elastic synthetic fiber irritation

If elastic is dyed polyester or nylon, undischarged azo dyes or reactive dyes may cause localized skin irritation in sensitive individuals. No testing data is publicly available for this product; risk is general to dyed synthetics, not brand-specific.

70/ 100
💨

Foam fragmentation and inhalation

Degraded foam padding in helmets can shed small particles, though this is a durability/maintenance issue rather than a chemical hazard. Replacement every 1-2 seasons mitigates this risk.

45/ 100

What’s reassuring

Base material not linked to PFAS

The main material recorded for this product is not one associated with PFAS.

100/ 100
💨

Formaldehyde / VOCs

Modern foam padding rarely uses formaldehyde-releasing resins, and no recalls or complaints specific to Easton padding kits mention formaldehyde. Risk is low but unconfirmed due to lack of material transparency.

Source, ATSDR
95/ 100

The full breakdown

What it's made of and why it matters

This product is foam padding (likely polyurethane or EVA) bonded with elastic straps, designed to adjust helmet or protective gear fit. Foam padding itself is chemically stable during normal use and does not typically leach hazardous substances into skin. The elastic straps are the secondary material of concern; composition is not publicly specified by Easton, so polyester or nylon blend is assumed. Adhesives used to bond foam to elastic are not disclosed and represent the smallest exposure route in a fitting accessory.

The brand's record and disclosure

Easton (sports equipment manufacturer) maintains no public PFAS disclosure statement and does not advertise chemical testing or certifications for this product line. The brand has not faced major public product safety recalls related to chemical hazards in padding or fitting accessories. Lack of transparency is typical for the sports-gear sector but limits ability to verify manufacturing standards. No third-party certifications (Oeko-Tex, GOTS, or similar) are claimed for this item.

How it compares in its category

Foam padding fit kits are a low-exposure category; most competitors (Riddell, Schutt, other helmet accessory brands) provide equally minimal disclosure. This product is not a worn garment in direct skin contact for hours, reducing dermal absorption risk versus apparel or footwear. Fit kits are typically replaced every 1-2 seasons, limiting cumulative exposure. The absence of dyes, finishes, or coatings typical of textiles lowers the hazard profile relative to padded athletic shirts or compression wear.

If you buy it

Store padding away from direct heat sources and UV light to slow foam degradation and off-gassing. Inspect the kit every 6-12 months for visible breakdown, flaking, or odor; discard if foam fragments or becomes sticky, indicating adhesive failure. If used in a helmet, ensure the helmet interior is cleaned monthly to prevent bacterial or fungal growth in the padding microenvironment. Wash elastic straps with cool water and mild soap if they contact sweat; do not machine dry, as heat can weaken adhesive bonds.

What we don’t know

Basis
Model estimate, 72% confidence, not a lab result
Lab test
None on record for this exact product
Brand statement
Easton has made none

Formulations change between production runs, so check the current label. How we grade.

More sports equipment padding grades

How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.