Piscifun Carbon X II Spinning Reel
Fishing reel shows no known PFAS-containing components.
Standard reel materials like aluminum, stainless steel, and carbon fiber contain no waterproofing or nonstick surfaces typically using PFAS.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Aluminum spool, stainless steel ball bearings, carbon fiber rotor
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
You may also be interested in
Top-graded picks in the categories readers replace first, every one scored on the same rubric.
Aqua Pure
3M Aqua-Pure AP802B Whole House Filter Housing
- polypropylene filter housing, carbon/sediment cartridge
- We found no PFAS statement from the brand
- Bacterial growth in spent cartridges
3 hazards checked on this product. See all of them.
Aquasure
Premier Series 75 GPD Under Sink Reverse Osmosis Water Filtration System
- RO membrane, carbon filters, stainless steel housing
- We found no PFAS statement from the brand
- Bacterial and microbial growth in housing and filters
4 hazards checked on this product. See all of them.
Avocado
Vegan Mattress
- organic cotton, natural latex, coconut coir, recycled steel coils
- The brand calls it PFAS-free, which we have not verified
- Heavy metals
2 hazards checked on this product. See all of them.
What Piscifun Carbon X II Spinning Reel is made of, ingredients and materials
The Piscifun Carbon X II uses aluminum for the spool, stainless steel for ball bearings, and carbon fiber for the rotor. These are all chemically stable materials with low solubility in water or organic solvents under normal fishing use. Aluminum can theoretically leach under acidic or salt-water conditions, but reel spools are not food-contact surfaces and residual levels are negligible for hand use. Stainless steel ball bearings are inert. Carbon fiber is an epoxy-resin composite that does not off-gas measurably under typical ambient conditions.
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Aluminum leaching (salt water)
Aluminum spool may corrode or leach trace metals in salt-water environments, but hand contact with a reel does not constitute ingestion exposure. Risk is material degradation, not consumer toxicity.
Stainless steel bearing corrosion
Stainless steel can undergo pitting in chloride-rich (salt) water if seals are breached. This causes mechanical failure rather than chemical leaching into consumables.
What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
Epoxy resin off-gassing (carbon fiber rotor)
Carbon fiber rotors are cured before assembly and do not emit volatile compounds under normal ambient or water conditions. No reports of odor or fume issues exist for this product line.
Paint or coating degradation
No paint finish is specified in product materials; parts appear to be bare or anodized aluminum and finished steel. If any painted components exist, inspect for chipping on older units and replace as needed.
Microplastic shedding
Reel body is metal and carbon fiber, not plastic-based. No microplastic generation is expected under normal use.
The full breakdown
The brand's record and disclosure
Piscifun maintains public silence on chemical safety, PFAS stance, or third-party certifications. No recalls or hazard warnings are on public record for this model. The brand does not publish material safety data sheets or supply-chain transparency reports. This is typical for mid-tier fishing equipment manufacturers and does not indicate non-compliance; it reflects the product category's regulatory distance from food, cosmetics, or apparel.
How it compares in its category
Spinning reels as a category pose minimal consumer chemical hazards compared to cookware, textiles, or plastics. The Carbon X II's use of stainless steel bearings and carbon fiber is a mid-to-premium specification that avoids cheaper zinc-alloy or brass components, which can shed heavy metals under corrosion. Compared to older or budget reels with painted finishes, the stated material composition is less likely to shed lead-based coatings, though no paint is mentioned here.
If you buy it
Rinse the reel with fresh water after salt-water use to prevent aluminum corrosion and bearing seizing, which can accelerate material degradation. Store in a dry place to minimize salt-spray oxidation of exposed metal parts. Do not submerge or soak the reel for extended periods, as salt water can penetrate bearing seals and accelerate stainless steel pitting. Replace the spool or reel if paint or coatings begin to chip or peel, exposing bare aluminum.
What we don’t know
- Basis
- Model estimate, 72% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Piscifun has made none
Formulations change between production runs, so check the current label. How we grade.
More fishing line grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.