Oakley Review, Is Oakley Non-Toxic?
PFAS Authority is a scoring system, not a laboratory. We do not test products ourselves. Grades are model-based, built from published ingredients, materials, certifications, brand disclosures and third-party lab results where they exist. See the rubric.
Across 4 graded products, Oakley averages Bad (20/100). On disclosure, the brand says nothing publicly about PFAS. None of its products grade Good or better yet. Grades are model-based estimates, not lab results.
Graded and flagged Poor and Bad, we’d swap these
Oakley
Men's Sub Temp RC Gore-Tex Jacket 2.0
Gore-Tex membrane with water-repellent coating finish
PFAS
Gore-Tex's historical water-repellent coating formulations used PFAS compounds. Oakley…
Coating degradation and microplastic shedding
water-repellent coating finishes on technical outerwear degrade over 2-3 years with…
Formaldehyde / VOCs
Gore-Tex lamination and seam-tape application sometimes uses formaldehyde-based adhesives…
Polyester shedding and synthetic fiber pollution
If the shell is 100% polyester (common in Gore-Tex constructions), washing sheds…
Gore-Tex historically used PFAS; current formulation status unclear from public sources.
⚠Waterproof or stain-proof treatment
Oakley
Men's Unbound Gore-Tex Shell Jacket 2.0
Gore-Tex membrane laminate with water-repellent coating treatment
Antimony in polyester
This jacket likely contains polyester (common in Gore-Tex outer and inner linings).…
Fiber shedding and microplastic release during wear and wash
All laminated Gore-Tex jackets shed microfibers during normal washing and wear…
Gore-Tex jackets typically use PFAS-based water-repellent coating; Oakley does not disclose PFAS status.
⚠Waterproof or stain-proof treatment
Oakley
Men Oakley Mthod Insulated Jacket
polyester/nylon with water-repellent coating water-repellent treatment
Heavy metals
Polyester and nylon are routinely dyed with both azo and non-azo dyes depending on color…
Antimony in polyester
Polyester fibers are sometimes treated with antimony compounds as a catalyst during…
Microplastic shedding from degraded coating
As the water-repellent coating and outer shell age, mechanical abrasion (friction against…
water-repellent coating degradation and chemical release timing
PFAS-based water-repellent coating coatings typically remain bound to the fabric surface…
Insulated jacket with likely water-repellent coating; Oakley does not disclose PFAS status.
⚠Waterproof or stain-proof treatment
Oakley
Men's TC Channel Jacket
Polyester with water-repellent coating water-repellent finish
Volatile organic compound (VOC) off-gassing from water-repellent coating finish
New water-repellent coating-treated garments may emit low levels of VOCs during initial…
Microplastics
All polyester garments shed microfibers, especially when new or washed frequently. While…
Waterproof jacket likely uses water-repellent coating treatment; PFAS status unclear without disclosure.
⚠Waterproof or stain-proof treatment
Every grade uses the same public rubric. How grades work →