Moulinex Easy Fry Infrared EZ832HF0 fryer
Avoid until Moulinex reveals what the non-stick coating contains.
This Moulinex infrared fryer has a non-stick coated basket with no disclosed formula or PFAS status. Even though infrared models avoid direct heat contact with coatings, PFAS can still be used in manufacturing.
The safe swap
Breville
Breville the Smart Oven
75/100 safety
Same rubric that flunked this product. The swap earned Excellent.
Still want this one anyway? Check the price on Amazon. We’d swap it.
Material
non-stick coated cooking basket (composition unspecified)
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
What’s concerning
Non-stick, chemistry undisclosed
Advertised as non-stick but coating type is not explained.
No PFAS disclosure
The company has not publicly discussed PFAS in this product.
Category baseline
cookware is a category where PFAS exposure is more common.
Teflon-type coating thermal decomposition (if Teflon-type coating-based non-stick)
If the basket coating is Teflon-type coating, overheating or damage can release fumes. Moulinex has not confirmed the coating type, so this risk cannot be ruled out. Standard air fryer use below 200°C is unlikely to trigger this, but accidental overheating or damaged coating increases risk.
Coating degradation and microparticle shedding
Any non-stick coating degrades with use and thermal cycling. Food may ingest microscopic coating particles, and the long-term health impact of ingesting non-stick polymers (Teflon-type coating or alternatives) remains under study. Regular inspection and replacement timing are critical controls.
Unspecified non-stick coating composition (material transparency gap)
The core hazard is not a known toxin but the absence of disclosure. Without knowing the coating chemistry, you cannot make an informed choice or predict long-term safety. This is a brand accountability issue that elevates uncertainty.
What’s reassuring
Aluminum leaching from heating element or housing
No reports of excessive aluminum leaching from Moulinex air fryer housings have been documented. Aluminum-based heating elements in air fryers are standard and considered safe under normal use if not damaged.
Electrical hazard or burn risk from infrared element
No safety recalls or documented electrical failures specific to the EZ832HF0 model. Standard air fryer burn risk from hot surfaces and steam is not product-specific and applies to all air fryers.
The full breakdown
What it's made of and why it matters
The Moulinex EZ832HF0 uses an infrared heating element paired with a non-stick coated cooking basket of unspecified composition. Moulinex has not publicly disclosed whether the basket coating is Teflon-type coating-based (traditional Teflon-type), ceramic, or another formulation. Without this information, you cannot assess whether the non-stick layer poses thermal decomposition risk at the fryer's operating temperature or what happens if the coating degrades.
The brand's record and disclosure
Moulinex (owned by Groupe SEB) does not maintain a public PFAS disclosure policy or commitment to phasing out fluorinated coatings in small appliances. The brand has not voluntarily provided coating composition data for this model despite widespread consumer concern about non-stick safety. No official recalls or safety warnings specific to this fryer have been recorded, but the silence on materials is a transparency gap.
How it compares in its category
Most air fryer manufacturers still use Teflon-type coating or proprietary fluorinated coatings on cooking baskets; few disclose composition or offer certified PFAS-free alternatives at consumer price points. Some competitors (like Ninja and Cosori) have begun labeling coatings or offering ceramic-coated models. The Moulinex EZ832HF0 does not stand out as more transparent or safer than mid-range competitors, placing it squarely in the standard-risk category for air fryers.
If you buy it
Never exceed the manufacturer's recommended temperature settings; most non-stick coatings begin degrading above 350-400°C, and air fryers can reach 200°C regularly. Inspect the basket visually before each use for peeling, discoloration, or damage to the coating. Avoid metal utensils and abrasive scrubbers; hand-wash gently or use the dishwasher only if the manual permits. Replace the basket immediately if coating damage is visible or if you detect any odor during heating.
What we don’t know
- Basis
- Model estimate, 35% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Moulinex has made none
Formulations change between production runs, so check the current label. How we grade.
Safer alternatives in Air Fryers
Ninja
Crispi 4-in-1 Portable Glass Air Fryer Cooking System
Glass cooking vessel with stainless steel and plastic components
Thermal fracture or stress in glass cooking vessel
Limited concern
Formaldehyde / VOCs
Limited concern
Electrical hazard or heating element degradation
Limited concern
Glass cooking surface avoids nonstick coatings entirely.
⚠Risky category by default
Ninja
Crispi Pro 6-in-1 Glass Air Fryer
Glass cooking vessel with stainless steel components
Thermal shock / glass breakage risk
Limited concern
Glass construction means lower PFAS concern than typical nonstick air fryers.
⚠Risky category by default
Cosori
Smart Toaster Oven
stainless steel exterior, glass and metal interior
Thermal degradation of gaskets or seals
Limited concern
Grease accumulation and combustion byproducts
Limited concern
Glass door thermal stress and breakage
Limited concern
Lower PFAS concern, toaster ovens rarely use nonstick coatings, though brand makes no transparency statement.
⚠Risky category by default
More air fryers grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.