303 Protectant · Fabric Stain Guard Sprays
303 Products Marine Aerospace Protectant, UV Protection, Restores & Protects Boats, 16 oz, 30340
Unknown coating composition. No PFAS disclosure or testing available.
Uses an undisclosed protective coating formula. Brand provides no PFAS information or third-party testing, leaving composition uncertain.
Still want this one anyway? Check the price on Amazon. We’d swap it.
Material
Proprietary UV protective coating, likely silicone or acrylic-based
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
Vague safety claims only
Uses vague language ("eco-friendly", "clean") without a specific PFAS statement.
Waterproof / stain-resistant treatment
Water-repellent coating treatments have historically used PFAS.
Volatile Organic Compounds (VOCs) inhalation risk
Solvent carriers in this protectant (typical to silicone coating formulations) evaporate during and shortly after application; inhalation in poorly ventilated spaces poses respiratory irritation and CNS effects at high exposure.
Eye and skin irritation from direct contact
SDS indicates the product causes eye irritation and may cause skin irritation or sensitization in some users; buffering with water and seeking prompt rinsing is standard first aid.
PFAS
Proprietary formulation and silent brand stance on PFAS disclosure mean presence cannot be ruled out; some silicone-based coatings and water-repellent finishes contain PFAS for durability, though not confirmed for this specific product.
Source, ATSDR ↗Environmental persistence and aquatic accumulation
Protective silicone coatings are designed to resist degradation and persist on surfaces; runoff into water systems poses potential bioaccumulation risk, particularly in marine environments where the product is intended for use.
Flammability hazard during storage and use
Product contains flammable solvents and may be packaged as an aerosol or liquid concentrate; improper storage near heat or open flame, or use near ignition sources, poses fire risk.
The full breakdown
What it's made of and why it matters
303 Marine Aerospace Protectant is a silicone or acrylic-based UV protective coating formulated to restore shine and resist UV degradation on marine vinyl, rubber, and plastic surfaces. The product contains volatile organic compounds (VOCs) as solvents to enable application; exact resin chemistry is proprietary and not disclosed on the label or safety data sheets available to consumers. Silicone-based coatings of this type typically do not off-gas formaldehyde or release phthalates, but solvent volatility during and after application poses inhalation risk in enclosed spaces.
The brand's record and disclosure
303 Products is a well-established marine and automotive care brand owned by the Armor All/SC Johnson portfolio; the company has not publicly disclosed PFAS presence or absence in this formulation, nor are there published third-party test results for PFAS content. The brand provides basic SDS (Safety Data Sheet) information but does not offer independent certifications like Cradle to Cradle or GreenGuard for this marine protectant line. No major recalls or contamination incidents are on record for this specific product.
How it compares in its category
Marine and automotive protectants in this category (silicone or acrylic-based aerosol or liquid coatings) are largely unregulated for PFAS, and 303 is typical in offering no independent PFAS testing. Some competitors such as Star brite and Meguiar's likewise do not disclose PFAS, while others do not publish ingredient detail at all. Water-based or solvent-free UV protectants exist (e.g., some plant-oil-based products) but are less common and offer shorter durability; 303's silicone formulation is mid-range for performance and hazard transparency.
If you buy it
Apply in well-ventilated outdoor or ventilated indoor spaces to minimize inhalation of VOCs; avoid spraying directly on skin or into eyes and wash hands after use. Do not apply to areas where runoff will enter water systems, especially in marine settings, as the protective coating can persist in sediment. Reapply every 3 to 6 months depending on UV exposure and surface weathering; replace once the protective layer visibly degrades or loses water-beading properties. Store in a cool, dry place away from heat and ignition sources, as the product is flammable.
What we don’t know
- Basis
- Model estimate, 45% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- 303 Protectant has made none
Formulations change between production runs, so check the current label. How we grade.
Better-graded alternatives in Fabric Stain Guard Sprays
Nikwax
Waterproofing Wax for Leather
wax-based waterproofing
Respiratory irritation or fume inhalation during application
Limited concern
PFAS
Moderate concern
A water-repellent or grease-resistant treatment of unstated chemistry, with a brand PFAS statement we have not verified.
⚠Waterproof or stain-proof treatment
Timberland
Waximum Waxed Leather Protector
Wax-based leather protector
Volatile organic compounds (VOCs) from solvents
High concern
Formaldehyde / VOCs
Limited concern
Skin sensitization from undisclosed additives
Limited concern
Wax coating lower concern than synthetic waterproofing, but unconfirmed.
⚠Brand says nothing about PFAS
Angelus
Mink Oil Paste Leather Waterproofer and Contitioner 3 oz
mink oil paste, natural oil-based conditioner
Microbial growth (natural oil rancidity)
Limited concern
Skin sensitization (mink oil allergenicity)
Limited concern
Lower concern; natural oil product unlikely to contain PFAS but unverified.
⚠Brand says nothing about PFAS
More fabric stain guard sprays grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.