Bey Berk · Jewelry Cases & Jewelry Organizers
Birdseye Maple Lacquered Wood 3-Level Jewelry Box (BB670BRL)
Skip if concerned; lacquer source unspecified by brand.
Birdseye maple jewelry box with lacquer coating. Wood is lower concern; lacquer formulation unknown and not disclosed by Bey Berk.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Birdseye maple wood with lacquer finish
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
You may also be interested in
Top-graded picks in the categories readers replace first, every one scored on the same rubric.
- polypropylene filter housing, carbon/sediment cartridge
- We found no PFAS statement from the brand
- Bacterial growth in spent cartridges
3 hazards checked on this product, all on its full breakdown.
Aquasure
Premier Series 75 GPD Under Sink Reverse Osmosis Water Filtration System
- RO membrane, carbon filters, stainless steel housing
- We found no PFAS statement from the brand
- Bacterial and microbial growth in housing and filters
4 hazards checked on this product, all on its full breakdown.
Avocado
Vegan Mattress
- organic cotton, natural latex, coconut coir, recycled steel coils
- The brand calls it PFAS-free, which we have not verified
- Heavy metals
2 hazards checked on this product, all on its full breakdown.
What Birdseye Maple Lacquered Box (BB670BRL) is made of, ingredients and materials
Birdseye maple is a solid hardwood with natural grain, finished with a lacquer topcoat. Lacquer is a hard, fast-drying film made from dissolved resins and solvents; it creates the glossy, protective surface but its chemical composition (including potential formaldehyde-releasing binders or volatile organic compounds) depends entirely on the manufacturer, which Bey Berk does not disclose. The wood itself is non-toxic, but the lacquer finish is the primary chemical exposure pathway.
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Formaldehyde / VOCs
Lacquer coatings can off-gas formaldehyde-releasing resins or solvent residues, particularly in the first weeks after manufacture. Bey Berk does not specify lacquer type (e.g., acrylic, nitrocellulose, water-based) or certifications, so VOC levels cannot be verified.
Source, ATSDR ↗Lacquer coating degradation and splinter exposure
If lacquer is scraped, peeled, or cracked over time due to mishandling or environmental stress, exposed wood fibers may splinter but pose no chemical hazard. Degraded lacquer itself is not a toxicity concern unless ingested in large quantities by young children.
Formaldehyde / VOCs
If the box contains plywood or veneer (not stated in product description), adhesives may off-gas formaldehyde. Solid birdseye maple is assumed based on product name, but interior construction materials are not disclosed by the brand.
Source, ATSDR ↗What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
Heavy metals
No records of lead or cadmium contamination in Bey Berk lacquered products. Standard lacquer formulations do not typically contain heavy metals, but this cannot be confirmed without chemical disclosure from the brand.
Source, FDA ↗Lint or fiber shedding from internal lining
No information provided on internal lining material. If velvet, silk, or synthetic fabric is used, minimal shedding is expected under normal storage use; fibers would not pose a health hazard to jewelry.
How is this PFAS grade calculated?
The brand's record and disclosure
Bey Berk does not publicly disclose lacquer formulation, solvent type, or finish certifications (such as low-VOC or formaldehyde-free standards). No recalls or safety controversies are on record for this model. The brand's silence on finish sourcing means you cannot verify whether the lacquer meets strict indoor air quality standards, leaving uncertainty around long-term off-gassing.
How it compares in its category
Lacquered wood jewelry boxes are common in mid-range home goods. This product sits between fully untreated solid wood (no off-gassing risk but less durable finish) and polyester or plastic-lined alternatives (higher chemical load from synthetic coatings and liners). Lacquered maple is durable and does not shed fibers or microplastics as long as the finish remains intact.
If you buy it
Allow the box to air out in a well-ventilated space for 24-48 hours after unboxing to clear any residual solvent vapors. Keep it away from direct heat, sunlight, and humidity fluctuations, which can cause lacquer cracking and expose underlying wood. Do not place it near sleeping areas of infants or people with chemical sensitivities if off-gassing is a concern. Clean with a dry or barely damp microfiber cloth; avoid harsh solvents or water saturation that can degrade the lacquer.
What is not known about PFAS in this product?
- Basis
- Model estimate, 72% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Bey Berk has made none
Formulations change between production runs, so check the current label. How we grade.
More jewelry cases & jewelry organizers grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.