Le Creuset · Non-Stick Kitchen Gadgets
Le Creuset Revolution Non-stick Slotted Turner
Non-stick coating identity unclear, PFAS risk unconfirmed but unresolved.
Le Creuset hasn't revealed the nonstick coating chemistry on this turner. Without brand transparency or independent testing, PFAS presence cannot be confirmed or dismissed.
Still want this one anyway? Check the price on Amazon. We’d swap it.
Material
non-stick coating, unspecified Teflon-family coating or alternative
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
What’s concerning
Non-stick, chemistry undisclosed
Advertised as non-stick but coating type is not explained.
Category baseline
PFAS exposure happens more often with clothing products.
No PFAS disclosure
The company has not publicly discussed PFAS in this product.
Teflon-type coating fume risk (thermal degradation)
If the coating is traditional Teflon-type coating, risk is minimal for a turner since spatulas rarely contact temperatures above 500F during normal cooking. Risk rises only if the tool contacts direct flame, a burner coil, or an oven broiler element. Intact Teflon-type coating is considered safe by FDA up to normal cookware use temperatures.
Coating degradation and particle shedding
Non-stick coatings degrade faster with dishwasher exposure, metal utensil contact, and acidic foods. No specific recalls for this turner exist, but unspecified Teflon-family coating alternatives (if used) may have shorter durability records than established Teflon-type coating. Visible flaking is the primary trigger to stop use.
Lack of coating material transparency
Le Creuset does not publicly disclose whether this turner uses Teflon-type coating, PFPE, or another polymer, which is atypical for premium brands and prevents informed PFAS risk assessment. This transparency gap is the primary safety concern independent of actual hazard.
What’s reassuring
Leaching from coating base layer
No reports of heavy metals or harmful leachates from Le Creuset non-stick utensils have been established in public records. The stainless steel or nylon base is unlikely to leach under normal use; risk is primarily from the top-coat integrity.
Stainless steel or nylon base compatibility
If the base is stainless steel, no leaching concerns exist. If nylon, it is safe for normal cooking but should not exceed 400F. No brand-specific issues reported for Le Creuset utensil bases.
The full breakdown
What it's made of and why it matters
This is a slotted turner (spatula) with a non-stick coating applied to what appears to be a stainless steel or nylon base. Le Creuset has not publicly specified whether the non-stick coating is a traditional Teflon-type coating-based Teflon-family coating, a PFOA-free alternative like PFPE (perfluoropolyether), or a non-fluorinated polymer. The coating material determines risk profile: Teflon-type coating coatings are stable when intact but can release fumes above 500F; newer alternatives have fewer PFAS but are less established. Without clear labeling, the actual chemistry cannot be verified.
The brand's record and disclosure
Le Creuset is a premium French cookware maker known for enameled cast iron and has maintained strong quality control historically. However, the company has not issued public statements about PFAS content, alternatives, or phase-out plans for any of its non-stick products, which is unusual among major brands in the post-2015 era. No major product recalls for this specific turner or coating defects have been widely reported. The silence on coating chemistry is a weakness in transparency for a premium brand.
How it compares in its category
Non-stick turners are lower-risk than non-stick frying pans because they do not sit directly on heat and rarely reach fume-release temperatures if used normally. Most competitors in the premium segment (OXO, Oxo Good Grips, Silicone-based alternatives) either disclose their non-stick material or use silicone or stainless steel exclusively. Le Creuset's refusal to specify puts it in a less transparent position than direct competitors, though the tool's limited heat exposure mitigates practical risk.
If you buy it
Keep the turner away from direct flame or heat sources above 400F and never use it on a bare burner. Hand wash only; dishwasher can degrade non-stick coatings over time. Inspect regularly for chipping, scratching, or flaking; if the coating begins to separate, discontinue use immediately. Replace every 3-5 years if used frequently, or sooner if visible wear appears, as degraded coatings may leach or shed particles. Consider requesting Le Creuset disclose the coating type directly before purchase if PFAS risk is a deciding factor.
What we don’t know
- Basis
- Model estimate, 35% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Le Creuset has made none
Formulations change between production runs, so check the current label. How we grade.
Safer alternatives in Non-Stick Kitchen Gadgets
Le Creuset
Signature Silicone Spatula Spoon
silicone (no nonstick coating)
Silicone polymer degradation at high heat
Limited concern
Bacterial growth in crevices or degraded material
Limited concern
Lower PFAS concern, silicone spatula carries minimal risk.
⚠Risky category by default
Le Creuset
Revolution Balloon Whisk
Stainless steel wire
Bacterial growth or contamination
Limited concern
Handle or rivet degradation
Limited concern
Lower concern, bare stainless steel whisk, no coating or nonstick surface.
⚠Risky category by default
Wüsthof
Wusthof Gourmet Hollow Edge Santoku Knife
stainless steel blade, no nonstick coating
Surface corrosion and pitting (foodborne pathogen harboring)
Limited concern
Bare stainless steel knife, lower PFAS concern, no nonstick coating.
⚠Risky category by default
More non-stick kitchen gadgets grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.