Maxfli · Golf Balls & Equipment
Maxfli Men's 2024 Honors Golf Glove
Leather glove likely has water-repellent coating, PFAS status unknown.
Leather and synthetic golf gloves typically use water-resistant finishes, but treatment composition depends on manufacturer choice without Maxfli disclosure.
The better-graded swap
Wilson
Wilson Men's Profile Complete Golf Set
85/100 safety
Same rubric that flunked this product. The swap earned Excellent.
Still want this one anyway? Check the price on Amazon. We’d swap it.
Material
Leather palm, synthetic back, moisture-wicking lining
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
You may also be interested in
Top-graded picks in the categories readers replace first, every one scored on the same rubric.
- polypropylene filter housing, carbon/sediment cartridge
- We found no PFAS statement from the brand
- Bacterial growth in spent cartridges
3 hazards checked on this product, all on its full breakdown.
Aquasure
Premier Series 75 GPD Under Sink Reverse Osmosis Water Filtration System
- RO membrane, carbon filters, stainless steel housing
- We found no PFAS statement from the brand
- Bacterial and microbial growth in housing and filters
4 hazards checked on this product, all on its full breakdown.
Avocado
Vegan Mattress
- organic cotton, natural latex, coconut coir, recycled steel coils
- The brand calls it PFAS-free, which we have not verified
- Heavy metals
2 hazards checked on this product, all on its full breakdown.
What Maxfli Men's 2024 Honors Golf Glove is made of, ingredients and materials
The Maxfli Honors uses a leather palm (likely cabretta or similar goat leather) paired with synthetic back and moisture-wicking lining. Leather itself is a natural material with low acute toxicity, but the processing chemicals (tanning agents, dyes, finishes) and any water-repellent coating (water-repellent coating) coatings applied post-manufacture are the safety variables. The synthetic back and lining raise questions about polyester or nylon content, which may contain residual dyes, antimony catalysts, or flame retardants depending on supplier.
What’s concerning
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
Waterproof / stain-resistant treatment
Water-repellent coating treatments have historically used PFAS.
Formaldehyde / VOCs
Standard leather tanning and synthetic textile finishing can involve formaldehyde-based processes; no published data confirms or denies their use in Maxfli gloves. Off-gassing risk is low on skin contact but higher during first weeks of use.
Source, ATSDR ↗Azo dyes in leather or synthetic components
Leather and synthetic back dyes may include azo compounds if sourced from low-cost suppliers without OEKO-TEX or similar certification. No specific testing of this glove is on record; risk is typical for uncertified leather goods.
Antimony catalyst residues in polyester or nylon backing/lining
Synthetic fibers often use antimony trioxide as a polymerization catalyst; trace residues may remain. Dermal absorption during normal glove use is considered low, but risk rises if lining degrades or glove is damaged.
water-repellent coating degradation and particle shedding
Water-repellent coatings on athletic gloves wear with repeated wash and use. As coating flakes, absorbed moisture, dirt, and microscopic debris mix, increasing exposure to underlying treated fabric and potential inhalation of microparticulates during extended play.
Contact dermatitis from dyes, tanning residues, or lining synthetics
Individuals with sensitive skin or latex/synthetic allergies may react to undisclosed chemical residues in either leather or the moisture-wicking lining. Pre-use hand-washing and short wear trials are prudent for new users.
How is this PFAS grade calculated?
The brand's record and disclosure
Maxfli, owned by Dick's Sporting Goods, has no published materials safety disclosure, PFAS commitment statement, or third-party certifications (e.g., bluesign, OEKO-TEX) on record for this glove. The brand remains silent on water-repellent coating chemistry, leather tanning process, and synthetic component sourcing. This absence of transparency is typical for mid-tier golf equipment but limits consumer ability to verify manufacturing hazard controls.
How it compares in its category
Most golf gloves in this price/performance segment (premium amateur-level) use similar leather-synthetic hybrids with water-repellent coating finishes and do not disclose PFAS status. Higher-end alternatives from established brands (e.g., Titleist, Callaway) occasionally cite sustainable sourcing or tanning standards but rarely commit to PFAS avoidance. Budget gloves often use lower-grade leather and cheaper coatings with higher contamination risk; this product sits mid-range with unknown coating chemistry.
If you buy it
Wash hands after use and before eating to minimize any residual coating or dye contact, especially during break-in. Avoid heat exposure (direct sun storage, washers, dryers); air-dry only. Replace every 12-18 months or when palm shows wear or coating flaking, as degraded synthetic backing or separated palm may shed microfibers or concentrated residues. Store in a breathable pouch to prevent mold growth and chemical off-gassing in sealed bags.
What is not known about PFAS in this product?
- Basis
- Model estimate, 58% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Maxfli has made none
Formulations change between production runs, so check the current label. How we grade.
What are the PFAS-free alternatives to Maxfli Men's 2024 Honors Golf Glove?
- Steel clubheads, graphite shafts, rubber grips
- We found no PFAS statement from the brand
- Graphite shaft resin degradation and fiber exposure
3 hazards checked on this product, all on its full breakdown.
- Cabretta leather, likely tannin-tanned
- We found no PFAS statement from the brand
- Heavy metals
4 hazards checked on this product, all on its full breakdown.
- leather or synthetic leather with cotton lining
- We found no PFAS statement from the brand
- Heavy metals
4 hazards checked on this product, all on its full breakdown.
Find an alternative on AmazonMore golf balls & equipment grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.