Motorola · Waterproof Phone Cases
Body Glove Tidal Waterproof Phone Case for Motorola moto g
No coating described, and no PFAS statement from the brand.
The product information we reviewed describes rubber/TPE shell, with no water-repellent coating named. Water resistance on products like this usually comes from the material and its seals rather than a surface treatment. The brand has published no PFAS statement for it.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Rubber/TPE shell
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
You may also be interested in
Top-graded picks in the categories readers replace first, every one scored on the same rubric.
- polypropylene filter housing, carbon/sediment cartridge
- We found no PFAS statement from the brand
- Bacterial growth in spent cartridges
3 hazards checked on this product, all on its full breakdown.
Aquasure
Premier Series 75 GPD Under Sink Reverse Osmosis Water Filtration System
- RO membrane, carbon filters, stainless steel housing
- We found no PFAS statement from the brand
- Bacterial and microbial growth in housing and filters
4 hazards checked on this product, all on its full breakdown.
Avocado
Vegan Mattress
- organic cotton, natural latex, coconut coir, recycled steel coils
- The brand calls it PFAS-free, which we have not verified
- Heavy metals
2 hazards checked on this product, all on its full breakdown.
What Body Glove Tidal Waterproof Motorola moto is made of, ingredients and materials
The Tidal case uses rubber or thermoplastic elastomer (TPE) as its primary shell material. Unlike rigid plastics, TPE and rubber do not require plastic-type additives like BPA, phthalates, or antimony to function, and waterproofing relies on physical seals and material density rather than coatings. TPE can occasionally off-gas volatile organic compounds during manufacturing or when new, but this dissipates quickly and poses minimal risk during typical phone case use.
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Volatile organic compound (VOC) off-gassing
New rubber and TPE cases may emit mild VOCs during the first few days of use. This is temporary and poses minimal health risk during normal handling; airing the case out or wiping it with a dry cloth accelerates dissipation.
Bacterial growth in seals and crevices
Waterproof seals and edges can trap moisture and become a habitat for bacteria if not cleaned regularly. Risk is minimized by rinsing with fresh water after water exposure and drying thoroughly.
Microplastics
Prolonged UV exposure or mechanical wear can cause TPE to crack and shed small particles. This is rare during normal phone case use but can occur if the case is stored in direct sunlight for extended periods or flexed excessively.
Source, EPA ↗What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
Lead
No recalls or testing reports document heavy metal contamination in Body Glove phone cases. Reputable manufacturers of phone accessories typically use compliant dyes, but Body Glove has not published test results to confirm this.
Source, ATSDR ↗BPA & bisphenols
Rubber and TPE formulations for phone cases are not required to use phthalates or BPA to achieve waterproofing or flexibility. No evidence of these chemicals in this product type has been reported.
Source, FDA ↗How is this PFAS grade calculated?
The brand's record and disclosure
Body Glove (part of Motorola's accessories division) has not published specific chemical safety disclosures or certifications for this case model. No recalls, PFAS warnings, or documented chemical controversies are on record for this product line. The brand's silence on chemical transparency is typical for the phone case category and does not indicate a known problem, only an absence of proactive disclosure.
How it compares in its category
Waterproof phone cases made from rubber or TPE are among the lowest-risk options in the category; they avoid the leaching and coating-degradation issues sometimes seen in rigid polycarbonate cases or those with polyurethane coatings. Most competitors in this segment (Lifeproof, OtterBox, Spigen) use similar elastomer materials and pose comparable chemical profiles. Body Glove's design focuses on function over fancy coatings, which generally reduces chemical exposure.
If you buy it
Clean the case periodically with mild soap and water to prevent buildup of bacteria or residue in seals and crevices, especially after water exposure. Avoid prolonged exposure to direct sunlight or extreme heat (above 50°C/122°F), as TPE can degrade over time and lose its waterproof properties. Inspect seals and edges annually; if cracks, tears, or separation appear, replace the case. Do not rely on the case for waterproofing in saltwater or chlorinated pools without rinsing afterward.
What is not known about PFAS in this product?
- Basis
- Model estimate, 42% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Motorola has made none
Formulations change between production runs, so check the current label. How we grade.
What are the PFAS-free alternatives to Body Glove Tidal Waterproof Phone Case for Motorola moto g?
- Flax fiber and plant-based resin blend, compostable
- A third party reports verifying it as PFAS-free
- Coating degradation and durability over time
2 hazards checked on this product, all on its full breakdown.
- plant-based bioplastic (flax and other plant fibers)
- A third party reports verifying it as PFAS-free
- Thermal degradation and warping
3 hazards checked on this product, all on its full breakdown.
- Plant-based bioplastic (compostable blend)
- A third party reports verifying it as PFAS-free
- Bioplastic degradation and microparticle shedding
More waterproof phone cases grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.