Motorola · Waterproof Phone Cases
Body Glove Waterproof Tidal Phone Case for Motorola moto g Play
No coating described, and no PFAS statement from the brand.
The product information we reviewed describes elastomer/plastic, with no water-repellent coating named. Water resistance on products like this usually comes from the material and its seals rather than a surface treatment. The brand has published no PFAS statement for it.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Elastomer/plastic
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
You may also be interested in
Top-graded picks in the categories readers replace first, every one scored on the same rubric.
- polypropylene filter housing, carbon/sediment cartridge
- We found no PFAS statement from the brand
- Bacterial growth in spent cartridges
3 hazards checked on this product, all on its full breakdown.
Aquasure
Premier Series 75 GPD Under Sink Reverse Osmosis Water Filtration System
- RO membrane, carbon filters, stainless steel housing
- We found no PFAS statement from the brand
- Bacterial and microbial growth in housing and filters
4 hazards checked on this product, all on its full breakdown.
Avocado
Vegan Mattress
- organic cotton, natural latex, coconut coir, recycled steel coils
- The brand calls it PFAS-free, which we have not verified
- Heavy metals
2 hazards checked on this product, all on its full breakdown.
What Body Glove Waterproof Tidal Phone Play is made of, ingredients and materials
The Body Glove Tidal case is constructed from elastomer (synthetic rubber) and plastic polymers, materials chosen for durability and water resistance without requiring added chemical coatings. Elastomer is inherently flexible and resistant to degradation, reducing the need for stabilizers or plasticizers that introduce leaching risk. No protective coating, such as polyurethane or epoxy, is described, so there is no separate coating failure mode to monitor. This material combination is lower concern for phone case applications because it avoids both Teflon-type coating (non-stick coatings) and heavy-metal pigments common in decorative cases.
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Microplastic shedding from elastomer degradation
Elastomer cases can break down under UV, ozone, and thermal stress, releasing small plastic particles into pocket lint, water, or skin contact zones. No reported incidents specific to Body Glove cases, but the risk is inherent to the material class if the case is not replaced when visibly degraded.
BPA & bisphenols
Plastic polymers used in seals, ports, or internal reinforcements may contain BPA or phthalates, but elastomer itself does not typically require these. No data on this product's port gaskets or internal structures; assume standard commodity plastics unless specified as BPA-free.
Source, FDA ↗Port seal failure and waterproof integrity loss
All waterproof cases depend on seals that degrade over time. The Tidal case's IP rating relies on elastomer and seal integrity, not a chemical coating. Deterioration is predictable and manageable with inspection and timely replacement.
What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
Heavy metals
The Tidal case design context does not describe printed graphics, raised logos, or colored surface treatments. If graphics are present, they could theoretically contain lead or cadmium, but no such issues have been documented for this product or brand.
Source, FDA ↗Volatile organic compound (VOC) off-gassing from adhesives or sealants
If the elastomer seams are heat-sealed rather than glued, off-gassing risk is minimal. No information on adhesive type is available for this model; if present, it would be minor and would dissipate quickly in open air.
How is this PFAS grade calculated?
The brand's record and disclosure
Body Glove (owned by Kookaburra Holdings) does not publicly disclose PFAS use or restriction statements for phone cases, consistent with limited transparency in the accessories sector. The brand has no established recalls or chemical safety controversies on record for phone cases or elastomer products. No third-party certifications (such as OEKO-TEX or Cradle to Cradle) are documented for this product line, which is typical for protective accessories but reflects a general lack of independent verification. Their silence on PFAS is not unusual; most case makers do not proactively address the issue unless required by retailer or regulatory demand.
How it compares in its category
Elastomer-based waterproof cases like this Tidal model present lower concern than hard plastic cases with colored coatings or printed graphics, which may contain azo dyes or heavy-metal pigments. The absence of a topcoat means no Teflon-type coating fume risk (which applies to silicone cases treated with anti-slip coatings) and no adhesive volatiles from glued-on decorative elements. Compared to gel TPU (thermoplastic urethane) cases, elastomer holds up better to UV and ozone without hardening, lowering the risk of microcracking and particle shedding. This design sits in the lower-risk tier of the category.
If you buy it
Avoid prolonged exposure to direct sunlight and heat above 50 C (122 F), as elastomer can soften and lose water-seal integrity over time. Rinse the case with fresh water after saltwater or chlorinated pool use, and inspect the seals (typically at the charging port and headphone jack openings) every 6-12 months for cracks or separation. Do not use solvents, petroleum products, or harsh detergents to clean it; mild soap and water are sufficient. Replace the case if the elastomer becomes visibly cracked, discolored, or sticky, as these signs indicate polymer degradation and loss of waterproof protection.
What is not known about PFAS in this product?
- Basis
- Model estimate, 35% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Motorola has made none
Formulations change between production runs, so check the current label. How we grade.
What are the PFAS-free alternatives to Body Glove Waterproof Tidal Phone Case for Motorola moto g Play?
- Flax fiber and plant-based resin blend, compostable
- A third party reports verifying it as PFAS-free
- Coating degradation and durability over time
2 hazards checked on this product, all on its full breakdown.
- plant-based bioplastic (flax and other plant fibers)
- A third party reports verifying it as PFAS-free
- Thermal degradation and warping
3 hazards checked on this product, all on its full breakdown.
- Plant-based bioplastic (compostable blend)
- A third party reports verifying it as PFAS-free
- Bioplastic degradation and microparticle shedding
More waterproof phone cases grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.