72Good

Arctic Zone Review, Is Arctic Zone Non-Toxic?

PFAS Authority is a scoring system, not a laboratory. We do not test products ourselves. Grades are model-based, built from published ingredients, materials, certifications, brand disclosures and third-party lab results where they exist. See the rubric.

Across 7 graded products, Arctic Zone averages Good (72/100). On disclosure, the brand says nothing publicly about PFAS. 5 of its products grade Good or better. Grades are model-based estimates, not lab results.

Worth buying from Arctic Zone Good or better, safest first

Arctic Zone Titan Thermal HP Copper Tumbler 20oz

Arctic Zone

Titan Thermal HP Copper Tumbler 20oz

Stainless steel exterior, copper-lined vacuum insulation

PFAS Grade85Excellent
Overall Grade73Good

Vacuum seal degradation over time

Repeated thermal stress or mechanical damage can compromise the seal between stainless…

70
⛏️

Copper leaching from compromised seals

If the vacuum layer is physically breached through impact or manufacturing defect, copper…

70
⚠️

Bacterial or mold growth in seals

Vacuum-insulated tumblers with double walls create a difficult-to-clean cavity if…

70

Lower concern; stainless steel tumbler has no known PFAS-prone coatings.

Brand says nothing about PFAS

Arctic Zone Titan Thermal HP Straw Tumbler

Arctic Zone

Titan Thermal HP Straw Tumbler

stainless steel body, plastic straw

PFAS Grade85Excellent
Overall Grade77Excellent
🫧

Plastic straw degradation and microplastic release

If the straw is low-grade or non-food-certified plastic, repeated washing, heat exposure…

70
⚠️

Bacterial growth in crevices and straw interior

Thin plastic straws can harbor bacteria if not cleaned thoroughly, especially in the…

70

Lower concern; stainless steel and plastic straw unlikely PFAS sources.

Brand says nothing about PFAS

Arctic Zone 1600-39 - Titan Thermal HP Tumbler 24oz

Arctic Zone

1600-39 - Titan Thermal HP Tumbler 24oz

Stainless steel with vacuum insulation

PFAS Grade85Excellent
Overall Grade77Excellent

Lid/seal material degradation

Plastic lids and rubber gaskets can degrade with repeated thermal cycling and may release…

70
⚠️

Vacuum seal integrity failure

Double-wall vacuum tumblers can fail if the seal between walls is compromised, allowing…

70

Lower concern tumbler; brand lacks PFAS transparency on product.

Brand says nothing about PFAS

Arctic Zone Titan Thermal HP Tumbler

Arctic Zone

Titan Thermal HP Tumbler

stainless steel interior, plastic/polymer exterior

PFAS Grade85Excellent
Overall Grade63Good
🍼

BPA & bisphenols

Arctic Zone does not disclose the polymer type or additives in the exterior shell. If the…

70
🫧

Microplastic shedding from degraded plastic

The exterior plastic can scratch or degrade over years of use and dishwashing. No data…

70

Seal degradation and bacterial growth

Insulated tumbler seals (rubber gaskets between plastic and stainless layers) are a known…

45
💨

VOC or odor off-gassing from plastic

New plastic insulated tumblers can emit a faint chemical smell for the first few uses.…

70

Tumbler design lowers PFAS risk; no disclosure raises minor concern.

Brand says nothing about PFAS

Arctic Zone 20 oz Titan Thermal HP Tumbler

Arctic Zone

20 oz Titan Thermal HP Tumbler

Stainless steel interior, plastic exterior

PFAS Grade85Excellent
Overall Grade81Excellent
⛏️

Lid gasket or seal material leachables

Lid seals often contain elastomers or silicone; Arctic Zone does not disclose…

70

Lower concern tumbler; stainless steel contact surfaces pose minimal PFAS risk.

Brand says nothing about PFAS

Graded and flagged Poor and Bad, we’d swap these

20 oz Arctic Zone Titan Thermal Hp Travel Tumbler (Matte Navy)

Arctic Zone

20 oz Arctic Zone Titan Thermal Hp Travel Tumbler (Matte Navy)

Stainless steel exterior with waterproof internal coating (unspecified)

PFAS Grade40Poor
Overall Grade32Poor
🏷️

Undisclosed waterproof coating composition

Internal waterproof coating is not specified on product labels or technical sheets. If…

70

Coating degradation and microleaching over time

Polymer waterproof coatings on tumbler lids and seams can crack or peel with repeated…

70

Thermal tumbler with unknown waterproof coating; PFAS risk remains unclear.

Waterproof or stain-proof treatment

Arctic Zone Titan Thermal HP Mug

Arctic Zone

Titan Thermal HP Mug

Stainless steel with thermal insulation and unspecified waterproof/moisture-resistant coating

PFAS Grade40Poor
Overall Grade32Poor
♾️

PFAS

Arctic Zone does not publicly disclose whether the waterproof/moisture-resistant coating…

70
🫧

Coating degradation and particulate shedding

Any unspecified exterior or seam coating can degrade with time, temperature cycling, or…

70

Wait for brand to clarify coating composition and waterproofing methods.

Waterproof or stain-proof treatment

Every grade uses the same public rubric. How grades work →