Does Kitchenaid electric kettles & pitchers have PFAS?
PFAS Authority is a scoring system, not a laboratory. We do not test products ourselves. Grades are model-based, built from published ingredients, materials, certifications, brand disclosures and third-party lab results where they exist. See the rubric.
We graded 8 Kitchenaid electric kettles & pitchers products, averaging Poor (34/100). None of them grade Good or better.
Graded and flagged Poor and Bad, we’d swap these
Kitchenaid
Electric Kettle KEK1701
Stainless steel body, heating element, internal non-stick surface unspecified
Teflon-type coating fume risk or coating degradation
Internal coating material is unspecified by KitchenAid. If a Teflon-family coating is…
Nickel leaching from stainless steel
Stainless steel kettles can release trace nickel into acidic or very soft water over…
Bacterial growth or biofilm in stagnant water
Electric kettles left with standing water create conditions for Legionella or other…
Likely lower concern; most kettles avoid Teflon-type coating, though interior coating remains unconfirmed.
⚠Risky category by default
Kitchenaid
Traditional Dome Kettle 5KEK1222BAC
stainless steel body, plastic handle
Plastic handle degradation or leaching
Plastic handle is located away from boiling water and steam, minimizing thermal stress.…
Lower concern. Stainless steel kettle with no known PFAS risks.
⚠Risky category by default
Kitchenaid
1.7 Liter Electric Kettle, KEK1701
stainless steel body, heating element, likely polypropylene handle
Stainless steel leaching under acidic conditions
Stainless steel is very stable but can leach trace nickel and chromium if water is acidic…
Polypropylene handle degradation and off-gassing
Polypropylene handles are generally safe but can soften or warp if exposed to sustained…
Bacterial or mold growth inside sealed cavity
The interior water chamber and heating element cavity can accumulate mineral deposits and…
Electrical hazard from water seepage into base
If the base seal cracks or the kettle is filled above the line, water can enter the…
Lower concern; no PFAS-prone coatings found in kettle design.
⚠Risky category by default
Kitchenaid
Electric Kettle
Stainless steel body, unspecified internal coating
Teflon-type coating fume risk (non-stick coating degradation)
Interior coating type is unspecified; if Teflon-type coating-based, overheating or…
Unidentified coating leaching
Without material disclosure, any polymer or epoxy coating used internally could leach if…
Mineral deposit buildup and housing degradation
Hard water use can accelerate interior corrosion of unspecified coatings; uncoated…
Unknown interior coating raises concern; ask KitchenAid for specifics.
⚠Nonstick, coating undisclosed
Kitchenaid
Pro Line Electric Kettle
stainless steel body, heating element, interior unspecified
Unspecified interior material composition and potential leaching
KitchenAid does not publicly disclose the exact material lining the interior chamber. If…
Thermal stress and lid/seal integrity
Repeated heating cycles can weaken rubber or silicone gaskets over time. A degraded lid…
Bacterial growth in water chamber if not maintained
Any electric kettle left with residual water or stale water inside can develop mold or…
Stainless body likely safe, but interior specifics remain unclear.
⚠Nonstick, coating undisclosed
Kitchenaid
Precision Gooseneck Digital Kettle
Stainless steel body, interior coating unspecified
Interior coating composition and thermal stability
KitchenAid has not publicly disclosed the interior coating material or its behavior at…
Seal and gasket durability
Gooseneck kettles with precision spouts often include rubber or silicone seals. These can…
PFAS
Interior coatings in some electric kettles may contain PFAS for non-stick or hydrophobic…
Interior coating unspecified; minimal public data on PFAS risk.
⚠Nonstick, coating undisclosed
Kitchenaid
2.0-Quart Kettle with C Handle and Trim Band KTEN20CB
Stainless steel body, unspecified interior coating
Interior coating degradation and unknown composition
Stainless steel kettles often employ proprietary non-stick or protective coatings on the…
Thermal safety and auto-shutoff malfunction
Electric kettles rely on bimetallic strip or electronic thermostats to cut power at…
Limescale accumulation and mineral leaching
If the interior coating is porous or damaged, limescale deposits may harbor bacteria or…
Unspecified coating raises concerns.
⚠Nonstick, coating undisclosed
Kitchenaid
Artisan Kettle 5KEK1522E
Stainless steel body, unspecified kettle spout coating
Teflon-type coating/Teflon-family coating spout coating fume risk
The spout coating composition is not disclosed by KitchenAid. If it contains Teflon-type…
Coating degradation and particulate shedding
Unspecified coatings on the spout and internal surfaces can degrade over time with…
Unknown coating on spout.
⚠Nonstick, coating undisclosed
Better electric kettles & pitchers from other brands
Graded higher than the Kitchenaid average of 34.
Secura
Original Stainless Steel Double Wall Electric Water Kettle 1.8 Quart with Auto Shut-Off & Boil-Dry Protection
Stainless steel interior and exterior, no coating
Stainless steel leaching (chromium/nickel)
Limited concern
Mineral scale and bacterial colonization
Limited concern
Electrical hazard from degraded seals
Limited concern
Lower PFAS concern. Bare stainless steel kettle with no coatings.
⚠Risky category by default
Secura
Original Stainless Steel Double Wall Electric Water Kettle
Stainless steel interior and exterior, no coating
Nickel leaching from stainless steel
Limited concern
Lower PFAS concern. Bare stainless steel typically avoids PFAS coatings.
⚠Risky category by default
Secura
Stainless Steel Double Wall Electric Kettle Water Heater SWK-1001DW/
Stainless steel interior and exterior, no coating
Nickel leaching from stainless steel
Limited concern
Lower concern. Bare stainless steel is unlikely to contain PFAS.
⚠Risky category by default
See every Kitchenaid product we grade on the Kitchenaid brand page, or the full electric kettles & pitchers ranking.