Lakeland · Disposable Food Containers
Stock Your Home Microwaveable Kraft Brown Take Out Food Containers
Lower concern, Kraft containers likely uncoated or minimally treated.
Kraft brown takeout boxes are usually bare paperboard or lightly coated. Most grease barriers use non-fluorinated waxes, though Stock Your Home doesn't disclose coating specifics.
The safe swap
Fabri-Kal
Fabri-Kal Polypropylene Clear Deli Containers - 32 oz.
70/100 safety
Same rubric that flunked this product. The swap earned Good.
Still want this one anyway? Check the price on Amazon. We’d swap it.
Material
Kraft paperboard with grease-resistant coating
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
What’s concerning
Waterproof / stain-resistant treatment
Water-repellent treatments have historically contained PFAS chemicals.
Category baseline
PFAS exposure happens more often with clothing products.
No PFAS disclosure
The company has not publicly discussed PFAS in this product.
PFAS
Kraft takeout container coatings may contain fluorinated compounds, silicone polymers, or wax-clay blends to resist grease. Without manufacturer disclosure, migration risk cannot be ruled out, especially under microwave heat or with oily foods. However, migration at typical use temperatures is expected to be minimal.
Source: ATSDR ↗Ink or dye migration from exterior printing
Lakeland containers are printed with brand or product information on the exterior. If inks are not food-safe or high-migration, contact with food or condensation inside the container could cause dye transfer. No specific information on ink formulation is available.
What’s reassuring
Microplastics
Kraft paperboard coatings are not inherently plastic-based and do not shed microplastics like polystyrene or PET. Coating flaking is possible with misuse or age, but particles would be paper-based, not synthetic microplastics.
Source: EPA ↗BPA & bisphenols
BPA and BPS are primarily used in polycarbonate and epoxy-lined metal containers. Kraft paperboard coatings do not typically use these compounds; no evidence of their presence in this product type.
Source: FDA ↗The full breakdown
What it's made of and why it matters
These containers are made from kraft paperboard, a recycled or virgin wood pulp material, with a grease-resistant coating applied to the interior surface. The coating prevents food oils from breaking down the paper structure and leaching into food. Kraft paperboard itself is inert at room and microwaving temperatures; the coating's composition (likely wax, clay-based, or minimal PFAS treatment per the assessment) is the only chemical component with potential migration risk. When used within design parameters, migration into food is minimal because the coating sits between the paper and food.
The brand's record and disclosure
Lakeland is a UK-based homeware retailer without documented safety recalls or controversies specific to food containers in public records. The brand does not publicly disclose grease-coating chemistry or PFAS-free certification for this product line, which is typical for mass-market kraft container suppliers. No third-party testing or compliance statements have been located. The lack of transparency does not indicate a hazard, only that ingredient-level disclosure is not standard practice for this product category.
How it compares in its category
Kraft paperboard containers are among the lower-risk options for single-use food packaging, significantly safer than uncoated paperboard (which absorbs grease and degrades) or plastics like polystyrene or PET (which release microplastics or BPA under heat). They are comparable in safety profile to compostable bioplastic containers but without microplastic shedding concerns. However, containers with unknown or undisclosed grease coatings carry slightly higher theoretical risk than those with certified PFAS-free or water-based coatings, a distinction not verified here.
If you buy it
Use these containers for their intended purpose: refrigerated or ambient storage, and microwaving at standard power levels (not extended high-heat sessions). Do not use for foods with high fat content at temperatures above 80°C or for extended periods, as elevated heat can accelerate coating degradation and chemical migration. Replace containers if the interior coating shows visible damage, peeling, or grease saturation. Store in a cool, dry place; moisture and heat can weaken the grease barrier over time.
What we don’t know
- Basis
- Model estimate, 62% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Lakeland has made none
Formulations change between production runs, so check the current label. How we grade.
Safer alternatives in Disposable Food Containers
Lakeland
Sustainables 3 Compartment Hinged Lid To Go Food Container
Molded fiber/pulp (plant-based)
Degradation and food contact integrity
Limited concern
Mold or bacterial growth from moisture retention
Limited concern
Lower concern, molded fiber food containers rarely contain PFAS.
⚠Risky category by default
Rubbermaid
TakeAlongs Food Storage Containers 10 Piece Set
polypropylene plastic containers with lids
Microplastics
Limited concern
Leaching from lid components
Limited concern
Mold and bacterial growth in seals
Moderate concern
Lower concern, basic plastic food storage with no known PFAS triggers.
⚠Risky category by default
Rubbermaid
TakeAlongs Meal Prep Containers
polypropylene (PP) container, polyester gasket
Microplastics
Limited concern
Polyester gasket degradation
Limited concern
Odor absorption and food flavor transfer
Moderate concern
Lower concern for PFAS, no Teflon-family coating coatings typical of this type.
⚠Risky category by default
More disposable food containers grades
How we score: every product runs through the same public 0–100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.