Does Kitchenaid cookware have PFAS?
PFAS Authority is a scoring system, not a laboratory. We do not test products ourselves. Grades are model-based, built from published ingredients, materials, certifications, brand disclosures and third-party lab results where they exist. See the rubric.
We graded 10 Kitchenaid cookware products, averaging Bad (20/100). None of them grade Good or better. Against the other 42 cookware brands we grade, where the middle brand sits at 15/100, Kitchenaid is better than typical, scoring above 71% of them.
Graded and flagged Poor and Bad, we’d swap these
Kitchenaid
10 Inch Ceramic Fry Pan
Ceramic coating on aluminum core
Ceramic coating degradation and aluminum exposure
Ceramic coatings are prone to chipping or peeling with use. If the protective layer…
Thermal stress and coating failure
Rapid temperature changes (e.g., preheating empty on high, then adding cold food) can…
Aluminum leaching from damaged coating
If the ceramic seal is breached, prolonged contact with acidic foods (tomatoes, vinegar…
Ceramic cookware carries lower PFAS risk than Teflon-type coating nonstick.
⚠Risky category by default
Kitchenaid
Tri-Ply Stainless Steel Nonstick Skillet
Stainless steel with nonstick coating, composition unspecified
Teflon-type coating fume risk (thermal degradation)
If the nonstick coating is Teflon-type coating-based (not disclosed), overheating above…
Coating degradation and flaking
All nonstick coatings wear with use. Dishwasher use, high heat, and metal utensils…
PFAS
Composition unknown. PFAS are common in Teflon-type coating-based coatings; KitchenAid's…
Nonstick coating composition unknown; KitchenAid does not disclose PFAS status.
⚠Nonstick, coating undisclosed
Kitchenaid
Hard Anodized Ceramic Nonstick Frying Pan
Hard anodized aluminum with ceramic nonstick coating
Aluminum leaching
Hard anodized layer reduces but does not eliminate aluminum leaching, especially if the…
Ceramic coating degradation and microparticle release
Ceramic nonstick coatings are known to degrade with use, particularly under high heat or…
Thermal shock and coating separation
Rapid temperature changes (e.g., cold water on hot pan) can cause ceramic coatings to…
Ceramic nonstick is lower concern, but coating details lack transparency.
⚠Nonstick, coating undisclosed
Kitchenaid
Hard Anodized 2pc Nonstick Frying Pan Set
Hard anodized aluminum with nonstick coating (type unspecified)
Nonstick coating degradation and fume inhalation
Hard anodized pans with unidentified nonstick coatings may release toxic fumes if…
Aluminum leaching
Although hard anodization creates a protective barrier, breaches in the anodized layer…
Nonstick coating durability and replacement triggers
Hard anodized nonstick cookware typically shows visible coating wear (flaking, peeling…
Absence of safety certifications
KitchenAid's hard anodized line lacks third-party certifications (e.g., GREENGUARD, NSF…
Skip until manufacturer discloses nonstick coating type.
⚠Nonstick, coating undisclosed
Kitchenaid
Induction Nonstick Frying Pan
nonstick coating, unspecified type
Teflon-type coating fume inhalation (coating degradation over high heat)
If this pan uses Teflon-type coating (most probable for this price/brand tier), heating…
Aluminum leaching from base metal
If the nonstick coating is compromised by scratches or age, the aluminum substrate may…
Coating degradation and peeling
Nonstick cookware generally degrades over time; consumer reports and user reviews for…
PFAS
KitchenAid's failure to disclose the nonstick coating chemistry means you cannot…
Nonstick coating identity unknown; PFAS risk unclear without disclosure.
⚠Nonstick, coating undisclosed
Kitchenaid
Stainless Steel Nonstick Frying Pan Set
Stainless steel base with unspecified nonstick coating
Teflon-type coating fume risk (thermal)
Coating composition is undisclosed. If Teflon-type coating-based, overheating above 500°F…
Coating degradation over time
Typical nonstick cookware experiences wear from thermal cycling and abrasion. Consumer…
Coating delamination and microparticle release
If the nonstick layer separates from the stainless steel base due to impact or thermal…
Nonstick coating composition undisclosed.
⚠Nonstick, coating undisclosed
Kitchenaid
Hard-Anodized Induction Nonstick Frying Pan Set (2-Piece)
Hard-anodized aluminum with nonstick coating, type unspecified
Aluminum leaching from degraded anodized layer
Hard anodization significantly reduces aluminum migration compared to untreated aluminum…
Nonstick coating degradation and particle shedding
KitchenAid does not specify the nonstick coating type, making it impossible to assess…
Teflon-type coating fume inhalation risk (if Teflon-type coating-based coating)
If the nonstick coating is Teflon-type coating-based (unconfirmed), heating above 500F…
Nonstick coating type unknown; KitchenAid provides no PFAS disclosure.
⚠Nonstick, coating undisclosed
Kitchenaid
Color-Finished Stainless Steel 3-Ply Base Ceramic Nonstick Frying Pan
Ceramic nonstick coating, stainless steel base
Ceramic coating degradation and delamination
Ceramic nonstick coatings are durable but not permanent. If coating flakes or peels from…
Thermal stability of coating at high heat
Ceramic coatings can off-gas or degrade if heated above 400-500F repeatedly. KitchenAid…
Ceramic nonstick likely lower risk, but coating specifics undisclosed by brand.
⚠Nonstick, coating undisclosed
Kitchenaid
Hard-Anodized Induction Nonstick Frying Pan
Hard-anodized aluminum with nonstick coating
Teflon-type coating fume risk (conditional on unknown coating type)
If the nonstick coating is Teflon-type coating-based, overheating above 300, 350°C can…
Coating degradation and microparticle release
Nonstick coatings on hard-anodized cookware can flake or wear over time, especially with…
Unverified nonstick coating identity
The specific nonstick formulation (Teflon-type coating, PFOA-free alternative, or…
Skip until brand confirms nonstick coating PFAS status.
⚠Nonstick, coating undisclosed
Kitchenaid
5-Ply Clad Stainless Steel Nonstick Frying Pan
Stainless steel 5-ply clad with unspecified nonstick coating
Nonstick coating degradation and fume risk
Composition undisclosed; if Teflon-type coating-based, overheating above 500F risks…
Coating separation or peeling over time
Consumer reviews document coating degradation after 2-5 years of use, particularly at…
Nonstick coating is undisclosed, raising PFAS uncertainty.
⚠Nonstick, coating undisclosed
Better cookware from other brands
Graded higher than the Kitchenaid average of 20.
GreenPan
Ceramic Non-stick
Coating degradation and integrity loss
Limited concern
Aluminum leaching
Limited concern
Microparticle shedding from coating
Limited concern
Low risk, safe to use.
⚠Risky category by default
Scanpan
Ceramic Titanium
Ceramic coating degradation and aluminum leaching
Limited concern
Microplastic or particulate shedding from coating
Limited concern
Low risk, safe to use.
⚠Risky category by default
GreenPan
Chatham Ceramic Nonstick Frypan Set
Ceramic coating degradation over time
Limited concern
Thermal shock and handle integrity
Limited concern
Low risk, safe to use.
⚠Risky category by default
See every Kitchenaid product we grade on the Kitchenaid brand page, or the full cookware ranking.