Black ALADDIN Work Lunch Box w/ Thermos - Railroad, Construction
Lower concern; typical lunch box with no PFAS-prone features identified.
Aladdin work lunch boxes are standard plastic and stainless steel designs without nonstick coatings or water-repellent treatments. No PFAS disclosure available from brand; no lab testing found.
We flunk more products than we pass. This one earned its grade. How we grade
Material
Plastic lunch box, stainless steel thermos interior
Brand disclosure
Brand is silent on PFAS
Lab data
No public lab test
What Black ALADDIN Work Lunch Box w/ Thermos is made of, ingredients and materials
This product combines a plastic lunch box housing with a stainless steel thermos interior. The plastic exterior and lid are typical polypropylene or similar commodity plastics used in food storage; stainless steel (grade unspecified but standard for beverage thermoses) does not leach under normal use. Plastic lunch boxes in this category are not typically treated with BPA or phthalate plasticizers in modern production, though older stock or imported variants may vary. The thermos interior avoids ceramic coatings, glazes, and metal linings prone to lead or cadmium contamination.
What’s concerning
Category baseline
The starting point for this type of product, before anything specific to this product is counted.
No PFAS disclosure
No public statement from the brand about PFAS in this product.
Microplastics
Repeated thermal cycling, UV exposure, and mechanical wear of plastic hinges and lids can shed microparticles over 3-5 years of use. Risk is lower for a lunch box used at room temperature, but increases with frequent hot-dishwasher cycles or outdoor storage.
Source, EPA ↗Bacterial growth in thermos seal
Thermal bottleneck seals (rubber gaskets, silicone) can harbor mold or bacteria if not dried thoroughly after washing. This is a maintenance issue, not a material hazard, but requires regular inspection and replacement every 1-2 years if seal shows discoloration or odor.
What’s reassuring
Base material not linked to PFAS
The main material recorded for this product is not one associated with PFAS.
BPA & bisphenols
No recalls or documented BPA/BPS use in Aladdin lunch box plastics on public record. Modern polypropylene formulations typically exclude these compounds, but manufacturer composition disclosure is absent.
Source, FDA ↗Phthalate plasticizers
Phthalates are not standard in rigid polypropylene lunch boxes; no record of use or contamination in this product line. Soft plastic seals and hinges may carry minimal phthalate exposure, but levels are typically well below food contact limits if present.
Heavy metals
Stainless steel interior does not leach lead, cadmium, or nickel under normal beverage storage. Grade and specific alloy are not disclosed, but food-grade stainless (typically 18/8 or 304) is standard in consumer thermoses and poses no documented risk.
Source, FDA ↗The full breakdown
The brand's record and disclosure
Aladdin is a long-established brand (Stanley-owned) with no major food-contact safety recalls on record for this product line. The brand does not publicly disclose detailed material composition or PFAS testing results, which is typical for lunch box manufacturers but limits independent verification. No established controversies regarding BPA, phthalates, or heavy metals in their plastic food containers are documented. This silence on disclosure reflects industry norm rather than identified risk.
How it compares in its category
Plastic lunch boxes with stainless steel thermoses are mid-range in terms of material safety profile; they avoid glass (breakage, thermal shock) and ceramic-coated metal (glaze hazards). Comparable products from other brands (Rubbermaid, Contigo, other Aladdin lines) present similar or equivalent material concerns. Stainless steel interiors are a step above plastic-lined or aluminum-lined thermoses in avoiding direct contact corrosion and metal leaching. This product sits in the safer half of the lunch box category due to the stainless steel core.
If you buy it
Do not use the plastic components (lid, outer box) for hot foods or liquids above 70°C; keep hot contents in the thermos only. Hand-wash both plastic and stainless steel parts; do not use high-heat dishwashers on the plastic housing, as repeated thermal stress can degrade polymer integrity over time. Inspect the thermos seal and plastic hinges annually for cracks, discoloration, or warping; replace if degradation is visible. If any plastic part shows brittleness, cloudiness, or odor after 2-3 years, consider replacement to minimize microplastic risk from wear.
What we don’t know
- Basis
- Model estimate, 70% confidence, not a lab result
- Lab test
- None on record for this exact product
- Brand statement
- Aladdin has made none
Formulations change between production runs, so check the current label. How we grade.
Better-graded alternatives in Lunch Boxes
Klean Kanteen
Double Wall Vacuum Insulated Stainless Steel Food Canister Container with Leak Proof Lid
- Stainless steel body, silicone gasket lid seal
- The brand calls it PFAS-free, which we have not verified
- Silicone gasket degradation
3 hazards checked on this product. See all of them.
Snapware
Meal Box Glass
- borosilicate glass
- We found no PFAS statement from the brand
- Leaching from glass matrix or lid seals
2 hazards checked on this product. See all of them.
OXO
Steel Pop Big Square Short - 2.8 Qt/2.6 l
- Stainless steel container, no surface treatment
- Lid/gasket polymer leaching
3 hazards checked on this product. See all of them.
More lunch boxes grades
How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.