PFAS70/ 100Good
Overall62/ 100Good
Rubbermaid Pack & Go 4.57cups/ 1.16quart Ribbon Bento Box with Mini Bite, Meal Prep Container with Compartments and Divi

Rubbermaid · Lunch Boxes

Rubbermaid Pack & Go 4.57cups/ 1.16quart Ribbon Bento Box with Mini Bite, Meal Prep Container with Compartments and Divi

Good

Lower concern. Rigid PP food containers typically lack PFAS coatings.

Verdict · BuyPolypropylene bento box with no established hazards; lower PFAS concern and no brand safety red flags on record.

Rubbermaid Pack & Go is a rigid polypropylene bento box with compartments. No PFAS disclosure found, but bare PP containers are not a known PFAS risk category.

Check price on Amazon →

We flunk more products than we pass. This one earned its grade. How we grade

Material

Polypropylene (PP) rigid plastic, compartmented food container

Brand disclosure

Brand is silent on PFAS

Lab data

No public lab test

What Rubbermaid Pack & Go 4.57cups/ 1.16quart is made of, ingredients and materials

This container is rigid polypropylene (PP), a thermoplastic rated for food contact by FDA. PP is one of the more chemically stable plastics at room temperature and does not contain the endocrine disruptors found in some alternatives like polycarbonate. The compartmented design keeps foods separated, which is convenient but also means more plastic-air interface where volatile compounds could theoretically migrate if misused.

What’s concerning

♾️

Category baseline

The starting point for this type of product, before anything specific to this product is counted.

75/ 100
♾️

No PFAS disclosure

No public statement from the brand about PFAS in this product.

85/ 100
🫧

Microplastics

Repeated mechanical stress (dropping, impact), UV exposure, and microwave heating accelerate PP embrittlement and surface shedding. Visible cloudiness or stress cracks signal potential particle release into food.

Source, EPA ↗
70/ 100
⏳

Heat-induced degradation and volatiles

PP has a melting point around 165°C but degrades faster and may release volatile compounds if heated above 140°C, such as in dishwashers or microwaves. Hand washing and room-temperature storage minimize this risk.

70/ 100

What’s reassuring

✅

Base material not linked to PFAS

The main material recorded for this product is not one associated with PFAS.

100/ 100
🍼

BPA & bisphenols

Polypropylene does not inherently contain bisphenol A or its substitutes; these are common in polycarbonate and some epoxy linings, not PP. No recalls or reports for this product.

Source, FDA ↗
95/ 100
🧴

Phthalates

Rigid PP does not require phthalate plasticizers. Phthalate concern is high in soft flexible plastics (PVC, low-density PE) and is not established for Rubbermaid PP containers.

Source, ATSDR ↗
95/ 100
✅

Additive leaching (colorants, UV stabilizers)

PP food containers are regulated by FDA; manufacturers must use approved colorants and additives. No published testing or recalls for Rubbermaid bento boxes show leaching of pigments or stabilizers into food under normal storage and use.

95/ 100

The full breakdown

The brand's record and disclosure

Rubbermaid (Newell Brands) does not publicly disclose material sourcing or third-party testing results for this product line. The brand has not faced documented recalls or regulatory actions related to food container leaching. Rubbermaid has not committed to PFAS-free manufacturing in public statements, though rigid PP containers rarely require PFAS treatments.

How it compares in its category

Polypropylene bento boxes are middle-ground in food-storage safety. They sit between glass (more inert but fragile) and soft-sided silicone or thin plastics (higher leaching potential when flexed or heated). Rubbermaid's PP construction is typical for this price and durability tier; no material advantage or disadvantage versus peer brands using the same resin.

If you buy it

Do not microwave or dishwash at high temperature; PP softens above 140°C and can degrade or leach. Hand wash with mild soap and inspect regularly for stress cracks, cloudiness, or warping, which indicate material breakdown. Replace if cracks appear. Store away from direct sunlight to slow UV degradation. Use only for foods, not chemicals or cleaning products.

What we don’t know

Basis
Model estimate, 75% confidence, not a lab result
Lab test
None on record for this exact product
Brand statement
Rubbermaid has made none

Formulations change between production runs, so check the current label. How we grade.

Better-graded alternatives in Lunch Boxes

Klean Kanteen Double Wall Vacuum Insulated Stainless Steel Food Canister Container with Leak Proof Lid

Klean Kanteen

Double Wall Vacuum Insulated Stainless Steel Food Canister Container with Leak Proof Lid

100ExcellentPFAS grade
  • Stainless steel body, silicone gasket lid seal
  • The brand calls it PFAS-free, which we have not verified
  • Silicone gasket degradation

3 hazards checked on this product. See all of them.

Snapware Meal Box Glass

Snapware

Meal Box Glass

80ExcellentPFAS grade
  • borosilicate glass
  • We found no PFAS statement from the brand
  • Leaching from glass matrix or lid seals

2 hazards checked on this product. See all of them.

Oxo Steel Pop Big Square Short - 2.8 Qt/2.6 l

OXO

Steel Pop Big Square Short - 2.8 Qt/2.6 l

80ExcellentPFAS grade
  • Stainless steel container, no surface treatment
  • Lid/gasket polymer leaching

3 hazards checked on this product. See all of them.

More lunch boxes grades

How we score, every product runs through the same public 0-100 rubric based on materials, coatings, brand disclosure, lab findings, and recalls. See the full methodology → Spotted a mistake? Report an error.